<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1400" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Hi,</FONT></DIV>
<DIV><FONT face=Arial size=2> As I have posted earlier on this
list, we have a Cisco 7206 that is creaking, and although Oliver @ Cisco was
very helpful , basically the packet size of the traffic we are running
(mixture of VOIP including payload and VOIP signalling) is too small and the
throughput to high meaning the router cannot cope.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>We have even tried a G4 card in the unit and we get
about another 10mb out of it before it dies, giving us about 30mb, with about
25% packet loss, anymore than that the router drops too many
packets.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>So I'm looking to replace it, does anyone have any
suggestions? I know a couple of people mentioned Juniper kit, any
recommendations?</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>A bit more info basically we have a bandwidth
supplier on one side giving us 100mb and then a 3300 switch on the other
connected to our servers and the router just routes the traffic to the bandwidth
supplier, so we don't really need the cisco luxuries, just a reasonably priced,
hard mean packets switching machine, good for 50mb+ throughput even with small
packets.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Any help appreciated, I don't really just want to
through more money at it and end up with another 10mb of
throughput!</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Thanks</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Wayne</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV></BODY></HTML>