<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.5659" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Verdana size=2>How can I make this? <FONT size=3>
</FONT><FONT size=1>increasing your input queue on the GigE
port</FONT></FONT></DIV>
<DIV><FONT face=Verdana size=2></FONT> </DIV>
<DIV><FONT face=Verdana size=2>Regards </FONT></DIV>
<DIV><FONT face=Verdana size=2>Ilir</FONT></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=arievayner@gmail.com href="mailto:arievayner@gmail.com">Arie
Vayner</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=inako@abcom.al
href="mailto:inako@abcom.al">Ilir Nako</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Cc:</B> <A title=cisco-bba@puck.nether.net
href="mailto:cisco-bba@puck.nether.net">cisco-bba@puck.nether.net</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Tuesday, February 17, 2009 4:04
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [cisco-bba] High cpu -7200
vxr router --pppoe service</DIV>
<DIV><BR></DIV>
<DIV dir=ltr>Ilir,<BR><BR>Looking at the stats, and mostly due to the fact
that you have NAT enabled, I would say this is what the box can handle.<BR>I
would try increasing your input queue on the GigE port, as I can see quite a
lot of drops there, which could be due to the NAT fixups.<BR><BR>Arie<BR><BR>
<DIV class=gmail_quote>On Tue, Feb 17, 2009 at 4:59 PM, Ilir Nako <SPAN
dir=ltr><<A href="mailto:inako@abcom.al">inako@abcom.al</A>></SPAN>
wrote:<BR>
<BLOCKQUOTE class=gmail_quote
style="PADDING-LEFT: 1ex; MARGIN: 0pt 0pt 0pt 0.8ex; BORDER-LEFT: rgb(204,204,204) 1px solid">
<DIV bgcolor="#ffffff"><FONT face=Verdana size=2>
<DIV>I have and othe traffic at the router not pppoe .The users use local ip
addresses .</DIV>
<DIV> </DIV>
<DIV>I use virtual-template for pppoe:</DIV>
<DIV> </DIV>
<DIV><I><U>interface GigabitEthernet0/2.161<BR></U></I> description
VLAN Client PPPoE <BR> encapsulation dot1Q 161<BR> ip address
192.168.160.1 255.255.252.0<BR> ip access-group 2261 in<BR> ip
verify unicast source reachable-via rx allow-self-ping<BR> no ip
redirects<BR> no ip unreachables<BR> ip mtu 1492<BR> ip flow
ingress<BR> ip tcp adjust-mss 1452<BR> no snmp trap
link-status<BR> pppoe enable group pppoevlan161<BR> no cdp
enable</DIV>
<DIV><I><U>interface Virtual-Template161</U></I> <BR> mtu
1492<BR> ip unnumbered GigabitEthernet0/2.161<BR> ip access-group
2120 in<BR> no ip redirects<BR> no ip unreachables<BR> no ip
proxy-arp<BR> ip nat inside<BR> no ip
virtual-reassembly<BR> ip tcp adjust-mss 1452<BR> peer default ip
address pool pppoevlan161<BR> ppp mtu adaptive<BR> ppp
authentication pap chap</DIV>
<DIV> </DIV>
<DIV>bba-group pppoe pppoevlan161<BR> virtual-template 161</DIV>
<DIV> sessions per-mac limit 1<BR> sessions per-vlan limit
1024</DIV>
<DIV> </DIV>
<DIV>and policy -map to rate-limit the sessions of pppoe</DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV><BR>7200pppoe uptime is 2 days, 3 hours, 10 minutes<BR>System returned
to ROM by error - an Illegal Opcode exception, PC 0x627CDC3C at 12:41:54
berlin Sun Feb 15 2009<BR>System restarted at 12:43:49 berlin Sun Feb 15
2009<BR>System image file is
"disk2:c7200-adventerprisek9_sna-mz.124-6.T8.bin"</DIV>
<DIV> </DIV>
<DIV>Cisco 7206VXR (NPE-G1) processor (revision B) with 229376K/32768K bytes
of memory.<BR>Processor board ID 35137631<BR>SB-1 CPU at 700MHz,
Implementation 1025, Rev 0.2, 512KB L2 Cache<BR>6 slot VXR midplane, Version
2.11</DIV>
<DIV> </DIV>
<DIV><FONT size=2>
<P>7200pppoe#sh interfaces gigabitEthernet 0/1 </P>
<P>GigabitEthernet0/1 is up, line protocol is up </P>
<P>MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec, </P>
<P>reliability 255/255, txload 5/255, rxload 19/255</P>
<P>Encapsulation ARPA, loopback not set</P>
<P>Keepalive set (10 sec)</P>
<P>Full-duplex, 1000Mb/s, media type is RJ45</P>
<P>output flow-control is XON, input flow-control is XON</P>
<P>ARP type: ARPA, ARP Timeout 04:00:00</P>
<P>Last input 00:00:00, output 00:00:00, output hang never</P>
<P>Last clearing of "show interface" counters never</P>
<P>Input queue: 3/75/17807/20660 (size/max/drops/flushes); Total output
drops: 0</P>
<P>Queueing strategy: fifo</P>
<P>Output queue: 0/40 (size/max)</P>
<P>5 minute input rate <FONT color=#0000ff>75134000 bits/sec</FONT>, 10936
packets/sec</P>
<P>5 minute output rate <FONT color=#0000ff>20625000 bits/sec</FONT>, 10210
packets/sec</P>
<P>1269817388 packets input, 2310656794 bytes, 3764 no buffer</P>
<P>Received 2840854 broadcasts, 0 runts, 0 giants, 550 throttles</P>
<P>370339 input errors, 0 CRC, 0 frame, 370339 overrun, 0 ignored</P>
<P>0 watchdog, 504336 multicast, 0 pause input</P>
<P>0 input packets with dribble condition detected</P>
<P>1204250871 packets output, 3152549467 bytes, 0 underruns</P>
<P>3 output errors, 0 collisions, 2 interface resets</P>
<P>0 babbles, 0 late collision, 0 deferred</P>
<P>3 lost carrier, 0 no carrier, 0 pause output</P>
<P>0 output buffer failures, 0 output buffers swapped out</P>
<P>7200pppoe#sh interfaces gigabitEthernet 0/1 swi</P>
<P>7200pppoe#sh interfaces gigabitEthernet 0/1 switching </P>
<P>Throttle count 550</P>
<P>Drops RP 17807 SP 0</P>
<P>SPD Flushes Fast 20660 SSE 0</P>
<P>SPD Aggress Fast 0</P>
<P>SPD Priority Inputs 2510012 Drops 55</P>
<P>Protocol IP </P>
<P>Switching path Pkts In Chars In Pkts Out Chars Out</P>
<P>Process 21843334 190564023 12165257 1122868263</P>
<P>Cache misses 225 - - -</P>
<P>Fast 1245777776 2254484546 1192153063 2053685951</P>
<P>Auton/SSE 0 0 0 0</P>
<P>Protocol DEC MOP </P>
<P>Switching path Pkts In Chars In Pkts Out Chars Out</P>
<P>Process 0 0 306 23562</P>
<P>Cache misses 0 - - -</P>
<P>Fast 0 0 0 0</P>
<P>Auton/SSE 0 0 0 0</P>
<P>Protocol ARP </P>
<P>Switching path Pkts In Chars In Pkts Out Chars Out</P>
<P>Process 2510019 150604424 15883 952980</P>
<P>Cache misses 0 - - -</P>
<P>Fast 0 0 0 0</P>
<P>Auton/SSE 0 0 0 0</P>
<P>Protocol CDP </P>
<P>Switching path Pkts In Chars In Pkts Out Chars Out</P>
<P>Process 3057 874302 3074 1118911</P>
<P>Cache misses 0 - - -</P>
<P> </P></FONT></DIV>
<DIV></DIV></FONT> </DIV>
<DIV>
<DIV></DIV>
<DIV class=Wj3C7c>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: rgb(0,0,0) 2px solid; MARGIN-RIGHT: 0px">
<DIV
style="FONT: 10pt arial; font-size-adjust: none; font-stretch: normal">-----
Original Message ----- </DIV>
<DIV
style="BACKGROUND: rgb(228,228,228); FONT: 10pt arial; font-size-adjust: none; font-stretch: normal; moz-background-clip: -moz-initial; moz-background-origin: -moz-initial; moz-background-inline-policy: -moz-initial"><B>From:</B>
<A title=arievayner@gmail.com href="mailto:arievayner@gmail.com"
target=_blank>Arie Vayner</A> </DIV>
<DIV
style="FONT: 10pt arial; font-size-adjust: none; font-stretch: normal"><B>To:</B>
<A title=inako@abcom.al href="mailto:inako@abcom.al" target=_blank>Ilir
Nako</A> </DIV>
<DIV
style="FONT: 10pt arial; font-size-adjust: none; font-stretch: normal"><B>Cc:</B>
<A title=cisco-bba@puck.nether.net href="mailto:cisco-bba@puck.nether.net"
target=_blank>cisco-bba@puck.nether.net</A> </DIV>
<DIV
style="FONT: 10pt arial; font-size-adjust: none; font-stretch: normal"><B>Sent:</B>
Tuesday, February 17, 2009 3:45 PM</DIV>
<DIV
style="FONT: 10pt arial; font-size-adjust: none; font-stretch: normal"><B>Subject:</B>
Re: [cisco-bba] High cpu -7200 vxr router --pppoe service</DIV>
<DIV><BR></DIV>
<DIV dir=ltr>Ilir,<BR><BR>Can you provide some more info
please?<BR><BR>What kind of NPE processor do you use?<BR>What is the total
bps/pps rate you are running at?<BR><BR>If you could share a "show run"
maybe we could provide more feedback.<BR><BR>Thanks<BR>Arie<BR><BR>
<DIV class=gmail_quote>On Tue, Feb 17, 2009 at 3:38 PM, Ilir Nako <SPAN
dir=ltr><<A href="mailto:inako@abcom.al"
target=_blank>inako@abcom.al</A>></SPAN> wrote:<BR>
<BLOCKQUOTE class=gmail_quote
style="PADDING-LEFT: 1ex; MARGIN: 0pt 0pt 0pt 0.8ex; BORDER-LEFT: rgb(204,204,204) 1px solid">
<DIV lang=EN-US bgcolor="#ffffff" vlink="purple" link="blue"><FONT
face=Verdana size=2>Hi <BR>I use cisco 7200 vxr router for pppoe
services.For the moment are about 800 sessions .For one user are
500 sessions of NAT.But the cpu is about 60% .Is it normal for this
router ,this load of cpu ? <BR><BR>Regards <BR><FONT color=#888888>Ilir
Nako</FONT></FONT></DIV><BR>_______________________________________________<BR>cisco-bba
mailing list<BR><A href="mailto:cisco-bba@puck.nether.net"
target=_blank>cisco-bba@puck.nether.net</A><BR><A
href="https://puck.nether.net/mailman/listinfo/cisco-bba"
target=_blank>https://puck.nether.net/mailman/listinfo/cisco-bba</A><BR></BLOCKQUOTE></DIV><BR></DIV></BLOCKQUOTE></DIV></DIV></BLOCKQUOTE></DIV><BR></DIV></BLOCKQUOTE></BODY></HTML>