<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.5659" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY>
<DIV><FONT face=Verdana size=2>Thank you Adam for the response .</FONT></DIV>
<DIV><FONT face=Verdana size=2></FONT> </DIV>
<DIV><FONT face=Verdana size=2>The adaptors are ok because I have changed the
slots .The cards works only at the first subslot .</FONT></DIV>
<DIV><FONT face=Verdana size=2>Now I have changed again the cards and is this
log :</FONT></DIV>
<DIV><FONT face=Verdana size=2></FONT> </DIV>
<DIV><FONT face=Verdana size=1><EM>Apr 15 12:12:06.982: %SEC-6-IPACCESSLOGS:
list 50 denied 116.71.19.223 1 packet<BR>Apr 15 12:14:41.319:
%SPA_OIR-6-OFFLINECARD: SPA (SPA-5X1GE) offline in subslot 1/0<BR>Apr 15
12:14:41.291: %SPA_OIR-DFC1-6-REMCARD: Card removed from Subslot 0, interfaces
disabled<BR>Apr 15 12:14:51.643: %C6K_WAN_C2W-DFC1-4-READERROR: C2Wire read
failed reg 0x0000 on device SPA IDPROM<BR>Apr 15 12:14:51.643: %SPA-3-SW_ERROR:
subslot 1/0 spa type 0x4: SNMP attributes not defined<BR>-Traceback= 42ADD854
42ADDA30 42AE017C 42AE0680 42AE07E0 42AE0CE8<BR>Apr 15 12:14:51.643:
%SPA-3-SW_ERROR: subslot 1/0 spa type 0x4: SNMP attributes not
defined<BR>-Traceback= 42ADD74C 42ADDA44 42AE017C 42AE0680 42AE07E0
42AE0CE8<BR>Apr 15 12:14:51.643: %SPA_OIR-DFC1-6-INSCARD: Card inserted in
Subslot 0<BR>Apr 15 12:14:56.643: %SPA_OIR-3-RECOVERY_RELOAD: subslot 1/0:
Attempting recovery by reloading SPA<BR>Apr 15 12:14:56.643: %SPA-3-SW_ERROR:
subslot 1/0 spa type 0x4: SNMP attributes not defined<BR>-Traceback= 42ADD854
42ADDA30 42AE017C 42AE0680 42AE07E0 42AE0CE8<BR>Apr 15 12:14:56.643:
%SPA-3-SW_ERROR: subslot 1/0 spa type 0x4: SNMP attributes not
defined<BR>-Traceback= 42ADD74C 42ADDA44 42AE017C 42AE0680 42AE07E0
42AE0CE8<BR>Apr 15 12:15:06.643: %SPA_OIR-3-RECOVERY_RELOAD: subslot 1/0:
Attempting recovery by reloading SPA<BR>Apr 15 12:15:16.643:
%SPA_OIR-3-RECOVERY_RELOAD: subslot 1/0: Attempting recovery by reloading
SPA<BR>Apr 15 12:15:19.343: %SPA-3-SW_ERROR: subslot 1/0 spa type 0x4: SNMP
attributes not defined<BR>-Traceback= 42ADD854 42ADDA30 42AE017C 42AE0680
42AE0928 42AE0AE0 42AE0BA8 42AE0CCC<BR>Apr 15 12:15:19.343: %SPA-3-SW_ERROR:
subslot 1/0 spa type 0x4: SNMP attributes not defined<BR>-Traceback= 42ADD74C
42ADDA44 42AE017C 42AE0680 42AE0928 42AE0AE0 42AE0BA8 42AE0CCC<BR>Apr 15
12:15:26.643: %SPA_OIR-3-RECOVERY_RELOAD: subslot 1/0: Attempting recovery by
reloading SPA<BR>Apr 15 12:15:36.643: %SPA_OIR-3-RECOVERY_RELOAD: subslot 1/0:
Attempting recovery by reloading SPA<BR>Apr 15 12:15:41.643:
%SPA_OIR-3-SPA_POWERED_OFF: subslot 1/0: SPA unknown powered off after 5
failures within 1200 seconds<BR>Apr 15 12:15:41.643: %SPA-3-SW_ERROR: subslot
1/0 spa type 0x4: SNMP attributes not defined<BR>-Traceback= 42ADD854 42ADDA30
42AE017C 42AE0680 42AE07E0 42AE0CE8<BR>Apr 15 12:15:41.643: %SPA-3-SW_ERROR:
subslot 1/0 spa type 0x4: SNMP attributes not defined<BR>-Traceback= 42ADD74C
42ADDA44 42AE017C 42AE0680 42AE07E0 42AE0CE8</EM></FONT><A
href="mailto:cisco-bba@puck.nether.net"></A></DIV>
<DIV><FONT face=Verdana size=1><EM></EM></FONT> </DIV>
<DIV><FONT face=Verdana size=2></FONT> </DIV>
<DIV><FONT face=Verdana size=2>the show module command :</FONT></DIV>
<DIV><FONT face=Verdana size=2></FONT> </DIV>
<DIV><FONT face=Verdana size=2>7600#sh module <BR><EM><FONT size=1>Mod Ports
Card
Type
Model
Serial No.<BR>--- ----- --------------------------------------
------------------ -----------<BR> 1 0 1-subslot
SPA Interface Processor-600
7600-SIP-600 JAB094102E2<BR>
3 0 4-subslot SPA Interface Processor-400
7600-SIP-400 JAE1238V8KE<BR>
5 2 Supervisor Engine 720
(Active)
WS-SUP720-3BXL SAL1243720U</FONT></EM></FONT></DIV>
<DIV><FONT face=Verdana size=1><EM></EM></FONT> </DIV>
<DIV><FONT face=Verdana size=1><EM>Mod MAC
addresses
Hw
Fw
Sw Status<BR>---
---------------------------------- ------ ------------ ------------
-------<BR> 1 0015.621f.4880 to 0015.621f.48bf
1.0 12.2(18r)SX4 12.2(33)SRD Ok<BR> 3
0023.33fd.a780 to 0023.33fd.a7ff 2.5 12.2(33)SRD
12.2(33)SRD Ok<BR> 5 0016.9de6.bf24 to
0016.9de6.bf27 5.7
8.5(2) 12.2(33)SRD
Ok</EM></FONT></DIV>
<DIV><FONT face=Verdana size=1><EM></EM></FONT> </DIV>
<DIV><FONT face=Verdana size=1><EM>Mod
Sub-Module
Model
Serial Hw Status
<BR>---- --------------------------- ------------------ ----------- -------
-------<BR> 1 SIP-600 Distributed Forward
7600-SIP-600-DC JAB094101LW 1.0
Ok<BR> 1/0 5xGE
SPA
SPA-5X1GE
JAB100701EZ 2.2 OutSrvc<BR> 3/0 4xOC3 POS
SPA
SPA-4XOC3-POS JAE1233RW8W
1.0 Ok<BR> 5 Policy Feature Card
3 WS-F6K-PFC3BXL
SAL124376TA 1.9 Ok<BR> 5 MSFC3
Daughterboard
WS-SUP720
SAL1243759F 3.2 Ok</EM></FONT></DIV>
<DIV><FONT face=Verdana size=1><EM></EM></FONT> </DIV>
<DIV><FONT face=Verdana size=1><EM>Mod Online Diag Status <BR>----
-------------------<BR> 1 Pass<BR> 1/0 Not Applicable<BR>
3 Pass<BR> 3/0 Pass<BR> 5 Pass</EM></FONT></DIV>
<DIV><EM><FONT face=Verdana size=1></FONT></EM> </DIV>
<DIV><FONT face=Verdana size=2>After this I have reset the module 1
:</FONT></DIV>
<DIV><FONT face=Verdana size=2></FONT> </DIV>
<DIV><FONT face=Verdana size=2><EM>7600#hw-module module 1 reset</EM>
</FONT></DIV>
<DIV><EM><FONT face=Verdana size=2></FONT></EM> </DIV>
<DIV><FONT face=Verdana size=2>The first slot is online after this .The show
module command :</FONT></DIV>
<DIV><FONT face=Verdana size=2></FONT> </DIV>
<DIV><FONT face=Verdana size=1><EM>7600-BIG#sh module <BR>Mod Ports Card
Type
Model
Serial No.<BR>--- ----- --------------------------------------
------------------ -----------<BR> 1 5 1-subslot
SPA Interface Processor-600
7600-SIP-600 JAB094102E2<BR>
3 0 4-subslot SPA Interface Processor-400
7600-SIP-400 JAE1238V8KE<BR>
5 2 Supervisor Engine 720
(Active)
WS-SUP720-3BXL SAL1243720U</EM></FONT></DIV>
<DIV><EM><FONT size=1></FONT></EM> </DIV>
<DIV><FONT face=Verdana size=1><EM>Mod MAC
addresses
Hw
Fw
Sw Status<BR>---
---------------------------------- ------ ------------ ------------
-------<BR> 1 0015.621f.4880 to 0015.621f.48bf
1.0 12.2(18r)SX4 12.2(33)SRD Ok<BR> 3
0023.33fd.a780 to 0023.33fd.a7ff 2.5 12.2(33)SRD
12.2(33)SRD Ok<BR> 5 0016.9de6.bf24 to
0016.9de6.bf27 5.7
8.5(2) 12.2(33)SRD
Ok</EM></FONT></DIV>
<DIV><EM><FONT size=1></FONT></EM> </DIV>
<DIV><FONT face=Verdana size=1><EM>Mod
Sub-Module
Model
Serial Hw Status
<BR>---- --------------------------- ------------------ ----------- -------
-------<BR> 1 SIP-600 Distributed Forward
7600-SIP-600-DC JAB094101LW 1.0
Ok<BR> 1/0 5xGE
SPA
SPA-5X1GE
JAB100701EZ 2.2 Ok<BR> 3/0 4xOC3 POS
SPA
SPA-4XOC3-POS JAE1233RW8W
1.0 Ok<BR> 5 Policy Feature Card
3 WS-F6K-PFC3BXL
SAL124376TA 1.9 Ok<BR> 5 MSFC3
Daughterboard
WS-SUP720
SAL1243759F 3.2 Ok</EM></FONT></DIV>
<DIV><EM><FONT size=1></FONT></EM> </DIV>
<DIV><FONT face=Verdana size=1><EM>Mod Online Diag Status <BR>----
-------------------<BR> 1 Pass<BR> 1/0 Pass<BR> 3
Pass<BR> 3/0 Pass<BR> 5 Pass</EM></FONT></DIV>
<DIV><FONT face=Verdana size=1><EM></EM></FONT> </DIV>
<DIV><EM><FONT face=Verdana size=2>the log after this reset
is:</FONT></EM></DIV>
<DIV><EM><FONT face=Verdana size=2></FONT></EM> </DIV>
<DIV><FONT face=Verdana size=1><EM>Apr 15 12:17:31.456: %C6KPWR-SP-4-DISABLED:
power to module in slot 1 set off (Reset)<BR>Apr 15 12:18:45.809:
%CWAN_RP-6-CARDRELOAD: Module reloaded on slot 1/0<BR>Apr 15 12:18:45.809:
%OIR-6-INSCARD: Card inserted in slot 1, interfaces administratively shut
down<BR>Apr 15 10:18:47.493: %FABRIC_INTF_ASIC-DFC1-5-FABRICSYNC_DONE: Fabric
ASIC 0 Channel 1: Fabric sync done.<BR>Apr 15 12:18:54.439:
%DIAG-SP-6-RUN_MINIMUM: Module 1: Running Minimal Diagnostics...<BR>Apr 15
12:18:55.227: %DIAG-SP-6-DIAG_OK: Module 1: Passed Online Diagnostics<BR>Apr 15
12:18:56.010: %OIR-SP-6-INSCARD: Card inserted in slot 1, interfaces are now
online<BR>Apr 15 12:18:57.721: %DIAG-SP-6-RUN_MINIMUM: Module 1/0: Running
Minimal Diagnostics...<BR>Apr 15 12:18:55.457: %SCP-DFC1-5-ONLINE: Module online
<BR>Apr 15 12:19:12.753: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/0, changed
state to down<BR>Apr 15 12:19:13.189: %SPA_OIR-6-ONLINECARD: SPA (SPA-5X1GE)
online in subslot 1/0<BR>Apr 15 12:19:12.713: %DIAG-SP-6-DIAG_OK: Module 1/0:
Passed Online Diagnostics<BR>Apr 15 12:22:21.926: %SEC-6-IPACCESSLOGS: list 50
denied 200.252.29.132 1 packet</EM></FONT></DIV>
<DIV><EM><FONT face=Verdana size=1></FONT></EM> </DIV>
<DIV><EM><FONT face=Verdana size=1></FONT></EM> </DIV>
<DIV><EM><FONT face=Verdana size=1></FONT></EM> </DIV>
<DIV><FONT face=Verdana size=2>The IOS of the router is<EM> Cisco IOS Software,
c7600s72033_rp Software (c7600s72033_rp-ADVENTERPRISEK9-M), Version
12.2(33)SRD</EM></FONT></DIV>
<DIV><FONT face=Verdana size=2><EM>This version do not suport the SIP 600 but I
have upgrated with <U>c7600-fpd-pkg.122-33.SRD.pkg </U>After the upgrate of the
IOS the SIP was recognised but with only subslot .</EM></FONT></DIV>
<DIV><EM><FONT face=Verdana size=2>The type of the SIP 600 is with two
subslots.</FONT></EM></DIV>
<DIV><EM><FONT face=Verdana size=2>Maybe I have to change the IOS version of the
router .SXF version </FONT></EM></DIV>
<DIV><EM><FONT face=Verdana size=2></FONT></EM> </DIV>
<DIV><EM><FONT face=Verdana size=2></FONT></EM> </DIV>
<DIV><EM><FONT face=Verdana size=2>Regards </FONT></EM></DIV>
<DIV><EM><FONT face=Verdana size=2></FONT></EM> </DIV>
<DIV><EM><FONT face=Verdana size=2>Ilir</FONT></EM></DIV>
<DIV><FONT face=Verdana size=1><EM></EM></FONT> </DIV>
<DIV><FONT face=Verdana size=2>----- Original Message ----- </FONT>
<DIV><FONT face=Verdana size=2>From: "Adam Armstrong" <</FONT><A
href="mailto:lists@memetic.org"><FONT face=Verdana
size=2>lists@memetic.org</FONT></A><FONT face=Verdana size=2>></FONT></DIV>
<DIV><FONT face=Verdana size=2>To: "Ilir Nako" <</FONT><A
href="mailto:inako@abcom.al"><FONT face=Verdana
size=2>inako@abcom.al</FONT></A><FONT face=Verdana size=2>></FONT></DIV>
<DIV><FONT face=Verdana size=2>Sent: Wednesday, April 15, 2009 11:41
AM</FONT></DIV>
<DIV><FONT face=Verdana size=2>Subject: Re: [cisco-bba] SIP 600 : one
subslot</FONT></DIV></DIV>
<DIV><FONT face=Verdana><BR><FONT size=2></FONT></FONT></DIV><FONT face=Verdana
size=2>> Do you see no syslog messages when you insert the second
adaptor?<BR>> <BR>> Does the second adaptor work in the first
subslot?<BR>> <BR>> Does the first adaptor still work in the second
subslot?<BR>> <BR>> adam.<BR>> <BR>>> Hello<BR>>>
<BR>>> I have installed a SIP 600 at one cisco 7600 router .I have
inserted <BR>>> two SPA 5xGE but only one of them is online .I see
that the SIP seem <BR>>> to be with only subslot active:<BR>>>
7600#sh module<BR>>> Mod Ports Card
Type
Model
<BR>>> Serial No.<BR>>> --- -----
-------------------------------------- ------------------ <BR>>>
-----------<BR>>> 1 5 /1-subslot SPA
Interface Processor-600/ 7600-SIP-600
<BR>>> 1/0 5xGE
SPA
SPA-5X1GE
JAB093507M9 <BR>>> 2.2 Ok<BR>>>
<BR>>> In this type of SIP 600 only one sublot can be used or is
needed to <BR>>> put some command to activate the other
subslot ?<BR>>> <BR>>> Regards<BR>>> <BR>>>
Ilir<BR>>>
------------------------------------------------------------------------<BR>>><BR>>>
_______________________________________________<BR>>> cisco-bba mailing
list<BR>>> </FONT><A href="mailto:cisco-bba@puck.nether.net"><FONT
face=Verdana size=2>cisco-bba@puck.nether.net</FONT></A><BR><FONT face=Verdana
size=2>>> </FONT><A
href="https://puck.nether.net/mailman/listinfo/cisco-bba"><FONT face=Verdana
size=2>https://puck.nether.net/mailman/listinfo/cisco-bba</FONT></A></BODY></HTML>