[cisco-nas] Per user vpdn

[Dennis Peng]

You should configure "vpdn authen-before-forward" on your LAC and the
RADIUS profile would look like this:

tunnelme Password=="cisco"
        Service-Type = Framed-User,
        Tunnel-Client-Auth-Id = "LAC",
        Tunnel-Type = L2TP,
        Tunnel-Medium-Type = IP,
        Tunnel-Server-Endpoint = 10.1.1.1,
        Tunnel-Password = "cisco"

Dennis

Mike Hyde [mhyde at escape.ca] wrote:
> Does anyone have an example of how to apply radius attributes to a
> single user to put him into a l2tp tunnel without the use of a realm?  I
> have a couple of user that need a vpn connection, but would rather apply
> the changes in radius instead of alering their usernames to add domains
> and make config change son the NAS.
> 
> 
> Mike
> 
> _______________________________________________
> cisco-nas mailing list
> cisco-nas at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nas