[cisco-nas] AS5400 CPU usage!
Balgansuren
balgaa at publica.ub.mng.net
Mon Aug 25 16:56:37 EDT 2003
Hello,
Last 2 weeks time our AS5400 CPU always 95%-100%.
We didn't find any problem with IOS and configuration.
Is there any issue with high load on AS5400?
1.IOS information "sh ver":
----------------------------
Cisco Internetwork Operating System Software
IOS (tm) 5400 Software (C5400-IS-M), Version 12.1(5)T12, RELEASE
SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Mon 04-Feb-02 02:36 by ccai
Image text-base: 0x60008968, data-base: 0x60D80000
ROM: System Bootstrap, Version 12.1(2r)XD1, RELEASE SOFTWARE (fc1)
BOOTFLASH: 5400 Software (C5400-BOOT-M), Version 12.1(1)XD1, EARLY
DEPLOYMENT RE
LEASE SOFTWARE (fc2)
as5400 uptime is 1 day, 5 hours, 54 minutes
System returned to ROM by reload at 10:49:35 MN Sun Aug 24 2003
System restarted at 10:50:05 MN Sun Aug 24 2003
System image file is "flash:c5400-is-mz.121-5.T12.bin"
cisco AS5400 (R7K) processor (revision O) with 262144K/65536K bytes of
memory.
Processor board ID JAE050502E9
R7000 CPU at 250Mhz, Implementation 39, Rev 1.0, 256KB L2, 2048KB L3
Cache
Last reset from IOS reload
Channelized E1, Version 1.0.
Bridging software.
X.25 software, Version 3.0.0.
Primary Rate ISDN software, Version 1.1.
Manufacture Cookie Info:
EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x31,
Board Hardware Version 3.27, Item Number 800-5171-01,
Board Revision B0, Serial Number JAE050502E9,
PLD/ISP Version 1.0, Manufacture Date 1-Feb-2001.
Processor 0x14, MAC Address 0x03E339BC2E
Backplane HW Revision 1.0, Flash Type 5V
2 FastEthernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
216 terminal line(s)
8 Channelized E1/PRI port(s)
512K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
16384K bytes of processor board Boot flash (Read/Write)
Configuration register is 0x2102
as5400#
2.IOS information "sh spe modem csr summary":
--------------------------------------------------------
as5400#sh spe modem csr summary
Avg Hold Inc calls Out calls Failed No
Succ
Time Succ Fail Avail Succ Fail Avail Dial
Answer Pct
00:17:27 5493 632 100 0 0 0 0
160 90%
as5400#
3.IOS information "sh process cpu":
------------------------------------------
CPU utilization for five seconds: 100%/98%; one minute: 99%; five
minutes: 99%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
1 55000 20232 2718 0.00% 0.00% 0.00% 0 Load Meter
2 2280496 21659 105290 0.00% 0.12% 0.11% 0 PPP auth
3 1212272 37268 32528 0.00% 0.02% 0.00% 0 Check
heaps
4 0 1 0 0.00% 0.00% 0.00% 0 Chunk
Manager
5 24432 1378 17730 0.00% 0.00% 0.00% 0 Pool
Manager
6 0 2 0 0.00% 0.00% 0.00% 0 Timers
7 8084 16512 489 0.00% 0.00% 0.00% 0
ALARM_TRIGGER_SC
8 882228 5020 175742 0.00% 0.12% 0.07% 0 Serial
Backgroun
9 0 1 0 0.00% 0.00% 0.00% 0 RM PROCESS
10 0 1 0 0.00% 0.00% 0.00% 0 RM PROCESS
11 0 1 0 0.00% 0.00% 0.00% 0 RM PROCESS
12 0 1 0 0.00% 0.00% 0.00% 0 RM PROCESS
13 0 2 0 0.00% 0.00% 0.00% 0 CAS
Process
14 1218524 67668 18007 0.00% 0.02% 0.02% 0 ARP Input
15 11312 5304 2132 0.00% 0.00% 0.00% 0 HC Counter
Timer
16 4032 4308 935 0.00% 0.00% 0.00% 0 DDR Timers
17 0 2 0 0.00% 0.00% 0.00% 0 Dialer
event
18 0 2 0 0.00% 0.00% 0.00% 0 Entity MIB
API
19 0 1 0 0.00% 0.00% 0.00% 0 SERIAL
A'detect
20 0 1 0 0.00% 0.00% 0.00% 0 Critical
Bkgnd
21 1846452 76395 24169 0.22% 0.09% 0.07% 0 Net
Background
22 49624 21937 2262 0.00% 0.00% 0.00% 0 Logger
Thank you,
Balgaa
More information about the cisco-nas
mailing list