[cisco-nas] ICMP

[Aaron Leonard]

You can create an access list that matches only ICMP.
Then use "debug ip packet [detail] <LIST>".  You may
need to turn on process switching on the interface that
you're watching ... which could be pretty harsh on a 5200.

Aaron

---
>  Is there a command that I can use on a Cisco AS5248 or AS 5396 router that
> will allow me to watch traffic across the T1. Basically I would like to
> watch ICMP traffic. Thank you in advance.

> William L. Edwards
> President/CEO
> RNet Incorporated
> 765-342-3554
> wedwards at rnetinc.net

> _______________________________________________
> cisco-nas mailing list
> cisco-nas at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nas