[cisco-nas] MIB for terminating modem call on 5800??

[Dennis Peng]

You can disconnect a user via SNMP using the AAA-SESSION-MIB. You need
to have "aaa session-mib disconnect" configured to allow this.

Dennis

Jake [jake at nic.umass.edu] wrote:
> 
> What is the MIB OID for terminating a modem call on a 5800 running
> 12.2.2XB11?
> I'm looking to do the equivalent of "clear line 1/5/100" via SNMP.
> 
> 
> I opened a TAC case on this and the Tech. told me the only way it
> can be done is by using "cmShutdown" from CISCO-MODEM-MGMT-MIB,
> but this is a hard shutdown which takes the modem out of service. 
> 
> Taking the modem out of service is not an option for us, is there an equivalent
> to "clear line 1/5/100"???
> Thanks
> 
> -Jake
> 
> 
> 
> 
> -- 
> * - - - - * - - - - * - - - - * - - - - * - - - -* - - - -  *
> | Jake Cunningham                     Phone: (413) 577-0890 |
> | Network Analyst                       Fax: (413) 545-3203 |
> | Office of Information Technologies                        |
> | University of Massachusetts, Amherst                      | 
> * - - - - * - - - - * - - - - * - - - - * - - - -* - - - -  *
> 
> 
> _______________________________________________
> cisco-nas mailing list
> cisco-nas at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nas