[cisco-nas] AS5300 IOS upgrade

[Aaron Leonard]

Thomas,

This "isdn_Call_disconnect()" message in 12.0 mainline is
CSCdy24749 isdn_Call_disconnect displays on bootup.

This is a regression introduced in 12.0(19.1)*
by CSCdp70004.  It was caused by a stray debugging message left in the code;
this is a purely cosmetic issue.

Since 12.0 mainline is GD, cosmetic bugfixes cannot be committed
- therefore CSCdy24749 has been Closed.  Thus, in 12.0 mainline,
you'll just have to live with this message.  

12.1 and above don't have this message.

Aaron

---

> I've just upgraded an AS5300 from 12.0(16) to 12.0(27) as recommended by
> the recent advisory.

> When I make a call to the NAS from a normal phone and hang up, the
> following message appears in the log:

> rt105dub#
> Jul 22 11:52:56:  isdn_Call_disconnect()

> There is no debugging turned on.

> Is there anyway to turn this off?    It did not appear to be an issue in
> 12.0(16)

> Thanks,

> T.


> Thomas Bridge                           tbridge at netsource.ie
> Network and Systems Architect           Support phone: +353 1 4336070
> Netsource                               26 Upr Fitzwilliam St., Dublin 2

> _______________________________________________
> cisco-nas mailing list
> cisco-nas at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nas