[cisco-nas] nas-port vs cisco-nas-port (vpdn config)

[Dennis Peng]

Anastassios Chatzithomaoglou [achatz at forthnet.gr] wrote:
> We have the following config on one of our LNS:
> 
> !-----------------------
> vpdn aaa attribute nas-port vpdn-nas
> !
> radius-server vsa send accounting
> radius-server vsa send authentication
> !
> radius-server host x.x.x.x auth-port 1812 acct-port 1813 non-standard
> !------------------------
> 
> The problem is that we get different Nas-Port but same Cisco-Nas-Port.

I'm not clear what what you are comparing. Are you saying the NAS-Port
reported by the LNS is different than the NAS-Port reported by the
LAC? And that the LAC and LNS report the same Cisco-NAS-Port? Can you
show me an example (RADIUS accounting records)? Please indicate what
version you are running as well.

Dennis

> Is there a way to get both the same?
> 
> -- 
> ***********************************
>    Chatzithomaoglou Anastasios
> Network Design & Operations Center
>           FORTHnet S.A.
>       <achatz at forthnet.gr>
> ***********************************
> 
> _______________________________________________
> cisco-nas mailing list
> cisco-nas at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nas

-- 
-------------------------------------------------------------------------
      ||        ||                                 Dennis Peng
      ||        ||        Cisco Systems, Inc.      Escalation Engineer
     ||||      ||||       170 West Tasman Drive    Phone: (408) 526-6143
 ..:||||||:..:||||||:..   San Jose, CA 95134       Fax:   (408) 232-2343
   Cisco Systems Inc.                              dpeng at cisco.com
-------------------------------------------------------------------------