[cisco-nas] as5800 for fax off-ramp?

[Dennis Peng]

I don't think fax off-ramp is supported on the 5800. Fax off-ramp is
character based, so doesn't scale that well on the 5800. You should be
able to do it on a 5300 with just MICA cards though. Either CAS or
PRI should be ok for faxing.

Dennis

jlewis at lewis.org [jlewis at lewis.org] wrote:
> I've been asked to look into setting up an AS5800 (pulled from providing 
> dial-up service) to do outbound faxing.  I'm having trouble finding clear 
> documentation on this, but what I've found so far is worrying me.  
> 
> It looks like what I want is to setup a T.37 off-ramp gateway.  Can this 
> be done on a 5800 with 144-port mica modem cards?  Most of the docs talk 
> about voice cards/ports, which I don't have.
> 
> Also, for outbound faxing, does it matter if the T1's are configured as 
> channelized T1 vs PRI?
> 
> ----------------------------------------------------------------------
>  Jon Lewis *jlewis at lewis.org*|  I route
>  System Administrator        |  therefore you are
>  Atlantic Net                |  
> _________ http://www.lewis.org/~jlewis/pgp for PGP public key_________
> 
> 
> _______________________________________________
> cisco-nas mailing list
> cisco-nas at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nas

-- 
-------------------------------------------------------------------------
      ||        ||                                 Dennis Peng
      ||        ||        Cisco Systems, Inc.      Escalation Engineer
     ||||      ||||       170 West Tasman Drive    Phone: (408) 526-6143
 ..:||||||:..:||||||:..   San Jose, CA 95134       Fax:   (408) 232-2343
   Cisco Systems Inc.                              dpeng at cisco.com
-------------------------------------------------------------------------