[cisco-nas] Modem-pool

[Michael Taylor (mitaylor)]

 From memory, I have had a problem when I used the hyphen "-" in the modem 
pool name...

Perhaps try renaming the modem pool to : 'POOL_TEST'...

Regards,
Mike Taylor

At 09:42 AM Monday 30/06/2003 +0400, Rivo Tahina RAZAFINDRATSIFA wrote:
>Hi all,
>
>I use an AS5300 with IOS 120-4.XJ4,
>
>I have the following problem:
>
>When I try to connect to the NAS I have the following error in my debug log:
>
>00:04:03: to NEAT:(cid001A) EVENT_CALL_IDLE for slot0 ctlr4 chan5
>00:04:03: cas_is_fax_service: cas_group=0, service=0
>00:04:03: VDEV_ALLOCATE: failed to allocate a device from pool
>System-def-Mpool
>00:04:03: VDEV_ALLOCATE: failed to allocate a device from pool POOl-TEST
>00:04:03: ERROR: CSM_RX_CAS_EVENT_FROM_NEAT:(cid001B): EVENT_CALL_DIAL_IN:
>no modem is available.
>
>
>Here is part of trhe config:
>
>modem-pool POOL-TEST
>  pool-range 1-5
>
>controller E1 4
>  framing NO-CRC4
>  clock source line secondary 4
>  cas-group 0 timeslots 1-15,17-31 type r2-digital r2-compelled ani
>  cas-custom 0
>   caller-digits 2
>
>
>
>Does anyone know what's wrong?
>
>Kind regards.
>
>_______________________________________________
>cisco-nas mailing list
>cisco-nas at puck.nether.net
>http://puck.nether.net/mailman/listinfo/cisco-nas

Cisco Systems,
Customer Support Engineer,
Asia Pacific Technical Assistance Centre,
Sydney, Australia
Ph:     (+61 2) 8446 6044