[cisco-nas] connect-info questions

[Aaron Leonard]

> 5300 - 12.2.15T8
> ----------------
> This is from the start acct packet:

> connect-info=33600/31200 V34+/V42bis/LAPM (33600/28800)

> This is from the Stop acct packet

> connect-info=45333/31200 V90/V44/LAPM (50666/31200)

> Both are from the same user's session.

These must be from DIFFERENT sessions.  

a) you will never change compression protocols within a modem call
b) although you may retrain from V.90 down to V.34, you will never
retrain from V.34 up to V.90.

Aaron

---

>  From
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t11/ftattr77.htm#xtocid8
> "If the modem negotiation speeds are different, the speeds are shown in a
> bracket format at the end of the call."

> What could be a good explanation in my example?

> --
> ***************************************
>        Chatzithomaoglou Anastasios
> Network Design & Development Department
>               FORTHnet S.A.
>           <achatz at forthnet.gr>
> ***************************************

> _______________________________________________
> cisco-nas mailing list
> cisco-nas at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nas