[cisco-nas] Problem with TCL IVR script in AS5350

[Ganbold]

Hi,

I'm new to VoIP and I'm trying to send h323-credit-amount request to NAS 
from TCL IVR.
TCL IVR API is v1.0.

Following is the code snippets:

     set avSend(h323-credit-amount) $x
     set ev [authorize $accstring $pinstring "" [ani] avSend info]


However As5350 doesn't understand the request. I tried the TCL script in 
AS5300 and it is working.

Could somebody help me to solve this problem? I tried it different ways but 
it is not working.
I tried to use aaa authorize command but it is also not working.

thanks in advance,

Ganbold


AS5350 IOS version is:

Cisco Internetwork Operating System Software
IOS (tm) 5350 Software (C5350-IS-M), Version 12.2(15)T7,  RELEASE SOFTWARE 
(fc2)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Sat 09-Aug-03 01:44 by ccai
Image text-base: 0x6000895C, data-base: 0x61600000

ROM: System Bootstrap, Version 12.2(1r)1, RELEASE SOFTWARE (fc1)
BOOTLDR: 5350 Software (C5350-BOOT-M), Experimental Version 
12.1(20000922:142008) [nag-flo_t_0110 101]

asiatel-gw uptime is 1 hour, 31 minutes
System returned to ROM by reload at 16:11:47 gmt Fri Sep 5 2003
System restarted at 16:13:16 gmt Fri Sep 5 2003
System image file is "flash:c5350-is-mz.122-15.T7.bin"

cisco AS5350 (R7K) processor (revision T) with 131072K/65536K bytes of memory.
Processor board ID JAE06520197
R7000 CPU at 250Mhz, Implementation 39, Rev 1.0, 256KB L2, 2048KB L3 Cache
Last reset from IOS reload
Channelized E1, Version 1.0.
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
Primary Rate ISDN software, Version 1.1.
Manufacture Cookie Info:
  EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x32,
  Board Hardware Version 3.33, Item Number 800-5171-02,
  Board Revision B0, Serial Number JAE06520197,
  PLD/ISP Version 2.2,  Manufacture Date 24-Dec-2002.
Processor 0x14, MAC Address 0x0B46825F10
Backplane HW Revision 1.0, Flash Type 5V
2 FastEthernet/IEEE 802.3 interface(s)
6 Serial network interface(s)
60 terminal line(s)
2 Channelized E1/PRI port(s)
512K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
8192K bytes of processor board Boot flash (Read/Write)

Configuration register is 0x2102