[cisco-nas] AS5350 Connection Problems

[Aaron Leonard]

Seems like the client's circuit can only support V.34
in any case, so he'd be better off with a V.34 cap
(AT+MS=V34 or something like that.)

Perchance, when he was suffering from the problem, did
he have V.44 compression negotiated?  And then, when
the problem went away, was V.42bis compression being
used instead?

There are still some V.44 issues lurking.  We've found
that, on NextPort, adding S65=1024S66=1024 to the modemcap
will avoid some "illegal token" disconnects.  You can try
disabling V.44 on the client or the server.

Aaron

---

> On Fri, 5 Sep 2003, Internet Coordinator wrote:
> Greg,
> 	Another user called in this morning with this problem. Luckily
> they had 2 lines, so I was able to do a little troubleshooting. The called
> looked normal. It showed V.34 and V.92. Connection speeds were
> 26000/24000. I had the user disconnect and enter 'AT+MS=v90,0. They
> reconnected and this time it was a V.34 call and everything worked fine.
> So, does this mean that the problem is a V.92 problem? Any suggestions on
> how to maintain the V.92 calls and resolve the problem?

> Thank You,
> John McKinney
> WNC ONLINE

> > We experienced this issue in March when we upgraded all 15 of our
> > 5350s.  We didn't have time to worry about it at the time so we
> > downgraded back to 12.1-5.xm8 which also downgraded the firmware for the
> > nextport modems.  Now that we have time re upgraded all boxes to
> > 12.3(1a) and added a modemcap
> >
> > modemcap entry next:MSC=&FS0=0S29=6S21=3
> >
> > This has corrected thing BUT we needed to put in an INIT String for GWT
> > v92, BCM v92 and PCTel v92 modems.  Normally correcting it with +ms=v90
> > or +ms=v90,0
> >
> > Not sure if this will clear it up for you but this was what we did to
> > get updated past the IPv4 bug.
> >
> > thanks
> >
> > Greg
> >
> >
> > "Francisco (fxdomin2)" wrote:
> >
> > > We're running into something similar, however, it's on
> > > AS5300's with 12.2-2.XB11
> > > Our network provider who "manages" these units says that
> > > it's due to the existence of several viruses (mblast and
> > > nachi) on the internet causing ICMP related issues.
> > > Apparently, the Cisco Advanced Network Services Engineers
> > > (ANS) is working on the issue for the last three weeks, but,
> > > they haven't found a workaround.
> > >
> > > If anyone has seen this or is experiencing this, have a fix,
> > > etc. please let us know (Dennis, have you seen this?).
> > >
> > > Currently we need to have our as5300's reloaded every 2
> > > hours to bring the unit back to a useable state (all 25 of
> > > them). If left too long before rebooting, no traffic will
> > > pass (so no telnet etc.), users get stuck, and we regularly
> > > get fast busy signals. From a financial standpoint, this is
> > > killing our business.
> > >
> > > -----Original Message-----
> > > From: cisco-nas-bounces at puck.nether.net
> > > [mailto:cisco-nas-bounces at puck.nether.net]On Behalf Of John
> > > McKinney
> > > Sent: Friday, September 5, 2003 12:53 AM
> > > To: cisco-nas at puck.nether.net
> > > Subject: [cisco-nas] AS5350 Connection Problems
> > >
> > >         We seem to have a spuratic problem with users connecting,
> > > but then
> > > not being able to send/receive any data. The call will start
> > > like normal,
> > > then after about 8K of data, sessions just stops sending or
> > > receiving
> > > anything. I experienced it myself Sunday afternoon from my
> > > dial-up
> > > connection. Since this is a production enviroment I am
> > > having trouble
> > > tracking the problem. Even pings from my dialup computer to
> > > our local
> > > severs will stop. I could ping the AS5300, but nothing on
> > > the ethernet
> > > side. I switched to my laptop and it did the same thing. I
> > > drove to the
> > > office and everything was fine. I drove home, the problem
> > > was gone. I have
> > > in the past told yours to reboot, that windows was causing
> > > the problem but
> > > this is not the case. I think rebooting is just buying time
> > > until the
> > > problem goes away. This seems to come and go, but lately I
> > > am
> > > hearing more and more complaints. Where do we go from here?
> > > Phone
> > > conditions seem normal, no excessive retrains or noise.
> > >
> > > 2 AS5350's, not sure if one or both are doing it. Both are
> > > less than 1
> > > year old.
> > >
> > > IOS 12.2-2.XB11
> > >
> > > One has beening running XB11 for several weeks, the other 2
> > > days. Before
> > > that we were using XB8. The problem was present before the
> > > upgrade.
> > >
> > > Any suggestions would be greatly appreciated.
> > >
> > > Thank You,
> > > John McKinney
> > >
> > > _______________________________________________
> > > cisco-nas mailing list
> > > cisco-nas at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/cisco-nas
> > >
> > > _______________________________________________
> > > cisco-nas mailing list
> > > cisco-nas at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/cisco-nas
> >
> >
> > _______________________________________________
> > cisco-nas mailing list
> > cisco-nas at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nas
> >

> _______________________________________________
> cisco-nas mailing list
> cisco-nas at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nas