[cisco-nas] AS5200 ISDN idle timeout problem

Aragon Gouveia aragon at phat.za.net
Thu Sep 25 07:04:22 EDT 2003


Thank you.  It's working.  :)


| By Ahmad Cheikh Moussa <acm at netuse.de>
|                                          [ 2003-09-25 12:03 +0200 ]
> Hi,
> 
> it seems like you forgot to identify the dialer-list command.
> There is no definition of interesting traffic, therefore after
> a timeout of 120s, the isdn line is disconnected.
> 
> For Example:
> 
> Int dialer 2
>  ..
>  ..
>  dialer-group 1
> 
> 
> dialer-list 1 protocol ip permit
> 
> Regads,
>  Ahmad Cheikh-Moussa
> 
> 
> 
> Aragon Gouveia wrote:
> >Hi,
> >
> >I have an AS5200 (yea, I know) running IOS 12.1.20.  It's accepting ISDN
> >calls fine, but persistently disconnects them 2 minutes after connecting
> >regardless of line activity.  Reason for disconnection in radius accounting
> >logs is "Idle-Timeout".
> >
> >The idle timeout period is not being set from anywhere in the NAS's
> >configuration (that I can see), and neither from radius.  If I do a "show
> >interface" on a connected interface it does register line activity in the
> >"Last input" and "Last output" counters.  However, the idle timeout counter
> >is never reset and eventually runs down to 0 when the line is disconnected.
> >
> >Anyone know why this is happening?
> >
> >
> >Thanks,
> >Aragon
> >
> >
> >_______________________________________________
> >cisco-nas mailing list
> >cisco-nas at puck.nether.net
> >https://puck.nether.net/mailman/listinfo/cisco-nas
> 
> 
> -- 
> Ahmad Cheikh-Moussa
> NetUSE AG
> Dr.-Hell-Stra?e, 24107 Kiel, Federal Republic of Germany
> Telefon: +49 431 386435 00 --  Telefax: +49 431 386435 99
> Service: Service at NetUSE.DE --  http://NetUSE.DE/
> 


More information about the cisco-nas mailing list