[cisco-nas] Disconnect Request and POD problem

[Tassos Chatzithomaoglou]

I have managed to make it work with the following command (using latest radiator version):

./radpwtst -s routername -secret xxxxxx -auth_port 1812 -acct_port 1812 -noauth -noacct 
-dictionary /usr/radius/radiator/cf/dictionary -code Disconnect-Request User-Name=usernameX

"usernameX" is the user i'm trying to disconnect


AS5300 (12.2(15)T8)
-------------------
aaa pod server port 1812 auth-type any server-key xxxxxx


Ganbold wrote:

> Hi,
> 
> I have problem using disconnect request for Cisco AS5300. I'm using 
> Radiator-3.8 radius server.
> I use utility radpwtst to send disconnect-request directly to NAS but it 
> replies Disconnect-Request-NAKed.
> 
> Is there anybody who solved this problem before?
> Is there anybody who successfully used POD and Disconnect-request in 
> Cisco AS5300?
> What kind of attribute combination should I send to NAS?
> 
> What is Cisco IOS version known to work with disconnect-request?
> 
> Actually I tested disconnect request on Dial-UP Cisco NAS server and it 
> works just fine.
> But it is NOT working on VoIP.
> 
> We are trying to implement this feature in VoIP application.
> I appreciate very much if somebody can share its experience.
> 
> I tried with Session id attribute and no result. I even tried with 
> h-323-conf-id, h323-call-origin attributes, but didn't succeed.
> 
> Cisco AS5300 configuration:
> 
> aaa pod server auth-type any server-key xxx
> 
> Following is the debug output:
> 
> #debug aaa pod
> #AAA POD packet processing debugging is on
> #ter mon
> #
> Apr  8 00:23:47.933: POD: x.x.x.x request queued
> Apr  8 00:23:47.933: POD: x.x.x.x user 37255740 0.0.0.0 sessid 0x0 key 0x0
> Apr  8 00:23:47.933: POD:      Line     User     IDB          Session Id 
> Key
> Apr  8 00:23:47.933: POD: Sending NAK to x.x.x.x/50158
> #
> 
> Cisco IOS version is :
> Cisco Internetwork Operating System SoftwareIOS (tm) 5300 Software 
> (C5300-IS-M), Experimental Version 12.2(20020211:190758)
> 
> Debug log says request queued and sends NAK. What should I do? Can you 
> give me some recommendation?
> 
> 
> thanks in advance,
> 
> Ganbold
> 
> 
> _______________________________________________
> cisco-nas mailing list
> cisco-nas at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nas
> 

-- 
***************************************
       Chatzithomaoglou Anastasios
Network Design & Development Department
              FORTHnet S.A.
          <achatz at forthnet.gr>
***************************************