[cisco-nas] Disconnect Request and POD problem

[Ganbold]

But it is not working for VoIP:(

Ganbold

At 02:06 PM 14.04.2004, you wrote:
>I'm using it only for dialup users.
>
>But i suppose it should work for voip too, because it was made for it (CCO 
>docs) ;-)
>
>
>Ganbold wrote:
>>Hi,
>>At 12:51 AM 14.04.2004, you wrote:
>>
>>>I have managed to make it work with the following command (using latest 
>>>radiator version):
>>>
>>>./radpwtst -s routername -secret xxxxxx -auth_port 1812 -acct_port 1812 
>>>-noauth -noacct -dictionary /usr/radius/radiator/cf/dictionary -code 
>>>Disconnect-Request User-Name=usernameX
>>>
>>>"usernameX" is the user i'm trying to disconnect
>>
>>I run same command in Radius machine to my VoIP gateway AS5300. Nothing 
>>happens.
>>But when I run this command against Dial-Up AS5300 it works perfect.
>>Are you using it for Dial-Up or for VoIP gateway?
>>thanks in advance,
>>Ganbold
>>
>>
>>>AS5300 (12.2(15)T8)
>>>-------------------
>>>aaa pod server port 1812 auth-type any server-key xxxxxx
>>>
>>>
>>>Ganbold wrote:
>>>
>>>>Hi,
>>>>I have problem using disconnect request for Cisco AS5300. I'm using 
>>>>Radiator-3.8 radius server.
>>>>I use utility radpwtst to send disconnect-request directly to NAS but 
>>>>it replies Disconnect-Request-NAKed.
>>>>Is there anybody who solved this problem before?
>>>>Is there anybody who successfully used POD and Disconnect-request in 
>>>>Cisco AS5300?
>>>>What kind of attribute combination should I send to NAS?
>>>>What is Cisco IOS version known to work with disconnect-request?
>>>>Actually I tested disconnect request on Dial-UP Cisco NAS server and it 
>>>>works just fine.
>>>>But it is NOT working on VoIP.
>>>>We are trying to implement this feature in VoIP application.
>>>>I appreciate very much if somebody can share its experience.
>>>>I tried with Session id attribute and no result. I even tried with 
>>>>h-323-conf-id, h323-call-origin attributes, but didn't succeed.
>>>>Cisco AS5300 configuration:
>>>>aaa pod server auth-type any server-key xxx
>>>>Following is the debug output:
>>>>#debug aaa pod
>>>>#AAA POD packet processing debugging is on
>>>>#ter mon
>>>>#
>>>>Apr  8 00:23:47.933: POD: x.x.x.x request queued
>>>>Apr  8 00:23:47.933: POD: x.x.x.x user 37255740 0.0.0.0 sessid 0x0 key 0x0
>>>>Apr  8 00:23:47.933: POD:      Line     User     IDB          Session 
>>>>Id Key
>>>>Apr  8 00:23:47.933: POD: Sending NAK to x.x.x.x/50158
>>>>#
>>>>Cisco IOS version is :
>>>>Cisco Internetwork Operating System SoftwareIOS (tm) 5300 Software 
>>>>(C5300-IS-M), Experimental Version 12.2(20020211:190758)
>>>>Debug log says request queued and sends NAK. What should I do? Can you 
>>>>give me some recommendation?
>>>>
>>>>thanks in advance,
>>>>Ganbold
>>>>
>>>>_______________________________________________
>>>>cisco-nas mailing list
>>>>cisco-nas at puck.nether.net
>>>>https://puck.nether.net/mailman/listinfo/cisco-nas
>>>
>>>
>>>--
>>>***************************************
>>>       Chatzithomaoglou Anastasios
>>>Network Design & Development Department
>>>              FORTHnet S.A.
>>>          <achatz at forthnet.gr>
>>>***************************************
>
>--
>***************************************
>       Chatzithomaoglou Anastasios
>Network Design & Development Department
>              FORTHnet S.A.
>          <achatz at forthnet.gr>
>***************************************
>