[cisco-nas] NM-HDV

[Eric Knudson]

Peter,

You can't combine data(isdn or cas) & voice on a vwic - the only thing
that'll do data & voice on the same PRI is a voice-capable AS5X00, like a
5350. Take a look at "data dial-peers" for some additional info.

Regards,

Eric

----- Original Message ----- 
From: <info at beprojects.com>
To: <cisco-nas at puck.nether.net>
Sent: Wednesday, August 11, 2004 8:27 AM
Subject: [cisco-nas] NM-HDV


| If I had an NM-HDV in a 2600/3600/3700 with the VWIC-MFT and my incoming
| line was a PRI, could I do inbound/outbound voice (H.323 and/or SIP) and
| ISDN data calls on the same trunk?  I'm pretty sure the VWIC-MFT-T1 would
| support the ISDN data calls, but I'm not sure if I culd combine that with
| H.323 over the same line (i.e. call comes in, if it's data it is
terminated
| via ppp, if it's voice, it goes through H.323 to whatever it's mapped to).
| Thanks.
|
| Peder
|
| _______________________________________________
| cisco-nas mailing list
| cisco-nas at puck.nether.net
| https://puck.nether.net/mailman/listinfo/cisco-nas