[cisco-nas] Disconnect pptp user

[Robert Boyle]

At 08:55 AM 8/20/2004, you wrote:
>Hello,
>Thanks for replying.
>I don't think it worked :(
>
>router#show users
>     Line       User       Host(s)              Idle       Location
>*  2 vty 0     richardg   idle                 00:00:00 xxx.xxx.xxx.xxx
>
>   Interface      User        Mode                     Idle     Peer Address
>   Vi2          xxxx   Virtual PPP (PPTP  ) 00:00:05 xxx.xxx.xxx.xxx
>   Vi4          halo        Virtual PPP (PPTP  ) 00:00:00 xxx.xxx.xxx.xxx
>
>br00.nyiix#clear line 2
>% Not allowed to clear current line
>br00.nyiix# clear line vty 2
>[confirm]y [OK]
>router#show users
>     Line       User       Host(s)              Idle       Location
>*  2 vty 0     richardg   idle                 00:00:00 xxx.xxx.xxx.xxx
>
>   Interface      User        Mode                     Idle     Peer Address
>   Vi2          xxxx   Virtual PPP (PPTP  ) 00:00:02 xxx.xxx.xxx.xxx
>   Vi4          halo        Virtual PPP (PPTP  ) 00:00:07 xxx.xxx.xxx.xxx


That's not right. Try:

clear line vty 0 (Your telnet session?)

or

clear int vi2

clear int vi4




Tellurian Networks - The Ultimate Internet Connection
http://www.tellurian.com | 888-TELLURIAN | 973-300-9211
"Good will, like a good name, is got by many actions, and lost by one." - 
Francis Jeffrey