[cisco-nas] Disconnect pptp user

[Richard Greasley]

Rober, Nicholas.

I thank you both.

regards,
Richardg;
----- Original Message ----- 
From: "Nicolas Maton" <NMaton at be.tiscali.com>
To: "Richard Greasley" <richardg at blue-stream.net>;
<cisco-nas at puck.nether.net>
Sent: Friday, August 20, 2004 9:16 AM
Subject: RE: [cisco-nas] Disconnect pptp user


Hi Again,


My bad, I was to fast.
Use clear int vi* instead

-----Original Message-----
From: Richard Greasley [mailto:richardg at blue-stream.net]
Sent: vrijdag 20 augustus 2004 14:56
To: cisco-nas at puck.nether.net
Subject: Re: [cisco-nas] Disconnect pptp user

Hello,
Thanks for replying.
I don't think it worked :(

router#show users
    Line       User       Host(s)              Idle       Location
*  2 vty 0     richardg   idle                 00:00:00 xxx.xxx.xxx.xxx

  Interface      User        Mode                     Idle     Peer
Address
  Vi2          xxxx   Virtual PPP (PPTP  ) 00:00:05 xxx.xxx.xxx.xxx
  Vi4          halo        Virtual PPP (PPTP  ) 00:00:00 xxx.xxx.xxx.xxx

br00.nyiix#clear line 2
% Not allowed to clear current line
br00.nyiix# clear line vty 2
[confirm]y [OK]
router#show users
    Line       User       Host(s)              Idle       Location
*  2 vty 0     richardg   idle                 00:00:00 xxx.xxx.xxx.xxx

  Interface      User        Mode                     Idle     Peer
Address
  Vi2          xxxx   Virtual PPP (PPTP  ) 00:00:02 xxx.xxx.xxx.xxx
  Vi4          halo        Virtual PPP (PPTP  ) 00:00:07 xxx.xxx.xxx.xxx

----- Original Message ----- 
From: "Nicolas Maton" <NMaton at be.tiscali.com>
To: "Richard Greasley" <richardg at blue-stream.net>;
<cisco-nas at puck.nether.net>
Sent: Friday, August 20, 2004 8:41 AM
Subject: RE: [cisco-nas] Disconnect pptp user


Hi ,


Clear line vty or vi number.


Greetz



-----Original Message-----
From: Richard Greasley [mailto:richardg at blue-stream.net]
Sent: vrijdag 20 augustus 2004 14:39
To: cisco-nas at puck.nether.net
Subject: [cisco-nas] Disconnect pptp user

Hello,
Is there an IOS command I can use to disconnect PPTP user "xxxx"
connection
from the router?
The user account is local to the machine, I've tried removing the user
from
the local user account but they're still connected. Can anyone assist me
in
this please?

router#show users
    Line       User       Host(s)              Idle       Location
*  2 vty 0     richardg   idle                 00:00:00 xxx.xxx.xxx.xxx

  Interface      User        Mode                     Idle     Peer
Address
  Vi2          xxxxx    Virtual PPP (PPTP  ) 00:00:04 xxx.xxx.xxx.xxx
  Vi4          halo        Virtual PPP (PPTP  ) 00:00:00 xxx.xxx.xxx.xxx



Thanks much,
Richardg;

_______________________________________________
cisco-nas mailing list
cisco-nas at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nas


_______________________________________________
cisco-nas mailing list
cisco-nas at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nas