[cisco-nas] isdn and voice dialin config

[James Sneeringer]

On Fri, Aug 20, 2004 at 10:31:34AM -0800, Mark Johnson wrote:
> At 12:50 AM 8/20/2004 -0500, James Sneeringer wrote:
> >I've noticed there is a global "isdn switch-type" and a controller-
> >specific "isdn switch-type" command.  In a case like ours where we will
> >only have one PRI, does it particularly matter which one we use?
> 
> I think you mean interface specific?  Either way, doesn't matter.

Yes, that's what I meant.

> No, this is OK, but you didn't specify AAA in the config, so I wasn't
> thinking RADIUS.  Plus, you specified the local pool for the Dialer
> (ISDN) users, which isn't required if they will be getting their address
> via AAA (another advantage of using separate Dialer interfaces, or putting
> everything for the ISDN users under the PRI).

Sorry, another omission, I should have noted that I was using AAA.  I
just left out the things I thought weren't relevant.

> No, the D.  You can't configure the B-channels, in the end they are all
> in a rotary group of the D-channel.

Just like with BRI, I should have realized that.

Thanks again for your help.  I think we're ready to go.

-James