[cisco-nas] basic routing question on AS5396

[Adam Greene]

Here's a rather basic question, but I want to be sure before implementing it
on the network:

On an AS5396 serving dialup users only, will I have any problem if I
-    set the IP address of the Ethernet interface to 10.10.10.2/30
-    assign 10.10.10.128/25 to the modems (i.e. ip local pool default
10.10.10.129 10.10.10.254)
-    have the gateway router (10.10.10.1/30) route 10.10.10.128/25 to
10.10.10.2

I assume it'll work, but.....

TIA,
Adam

---
[This e-mail was scanned for viruses by Webjogger's AntiVirus Protection System]