[cisco-nas] Framed-Route syntax change in 12.3?

[Jon Lewis]

On Fri, 9 Jul 2004, Rainer Clasen wrote:

> did the Framed-Route syntax in 12.3.6a change? We've started to get the
> following message for a bunch of backup dialins:
>
> %AAA-3-PARSEERR: Error(2) parser is unable to parse IP route 192.168.1.0 255.255.255.0 150  per-user command
>
> This used to work fine with 12.1, 12.1T, 12.2 on as5300. I couldn't find
> any syntax description searching cisco.com.

What does the radius profile look like?  Is the line above from:

Framed-Route = "192.168.1.0/24 0.0.0.0 150"

I recall this syntax being broken in some "later" IOS releases some time
ago.  I can't remember if it was the first time I tried 12.3 code on a DSL
agg router, or 12.2 code.  The 0.0.0.0 above is supposed to be translated
by the router into 'whatever their Framed-IP-Address is' which could even
be a dynamic IP from the local pool on the router.

----------------------------------------------------------------------
 Jon Lewis                   |  I route
 Senior Network Engineer     |  therefore you are
 Atlantic Net                |
_________ http://www.lewis.org/~jlewis/pgp for PGP public key_________