[cisco-nas] multiple ip pool on the same nas
Oliver Boehmer (oboehmer)
oboehmer at cisco.com
Mon Mar 8 09:07:43 EST 2004
> I use a radius server for aaa, is there a way to assign a specific
> user, eg guest an IP address not from the local pool nor from radius
> server?
Hmm, I'm not sure I understand your question. You want to assign a
specific IP, but don't want to use radius nor local pools? Not sure what
you mean..
oli
>
>
> At 06:58 04/03/04 +0100, you wrote:
> > >
> > > How can I use 2 different ip pool on an as5300?
> >
> > ip local pool POOL-A <start-ip> <end-ip>
> > ip local pool POOL-B <start-ip> <end-ip>
> >
> > and then assign the appropriate pool by name using Radius
> > (cisco-avpair = "ip:addr-pool=POOL-A") or via interface config on
> > vtemplate, group-async, etc. ("peer default ip address pool POOL-A")
> >
> > oli
More information about the cisco-nas
mailing list