[cisco-nas] NAS-Identifier sent by AS5300 to RadiusNT

[Clara Hatem]

Hello

 

I have an AS5300 configured to authenticate with a Radius NT server.

 

IP1 is configured on the AS5300 FastEthernet0

In the Radius server, the AS5300 is defined using Ip address IP1

 

Now we recently added to the AS5300, an IP address IP2 to the Ethernet0
interface

 

What is happening is that in the Start/Stop accounting records sent by the
Cisco AS5300 to the Radius NT server, the NAS-Identifier is being sent as
IP2 instead of IP1

 

Therefore, users are authenticating OK, however they don't show in the table
of online users, due to the above,

 

Any idea on how to force the access server to send IP1 in the NAS-Identifier
attribute?

 

Thanks,

Clara

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-nas/attachments/20041026/82ddb66d/attachment.html