[cisco-nas] multilink per-user

[Aaron Leonard]

Tassos,

Is your goal to prevent particular users from negotiating multilink
per se, or is it only to prevent particular users from using more
than one link?  This latter goal can be accomplished.

Regards,

Aaron

---

> I'm trying to enable/disable "ppp multilink" per-user, which to be honest i don't believe
> it can be done since multilink gets negotiated during the first phase of lcp (before the
> actual authentication, so the per-user config is not known).

> I have tried configuring "lcp:interface-config#1=no ppp multilink" in the user's radius
> profile and "ppp multilink" under dialer, or "lcp:interface-config#1=ppp multilink" in the
> user's radius profile and "no ppp multilink" under dialer, but none of them seem to be
> doing what i want, since multilink dialer config always overrides my per-user config.

> In the first case if the customer comes with mlp enabled, he ends up with mlp enabled.
> In the second case if the customer comes with mlp enabled, he ends up with mlp disabled.

> Preauthentication should work here, but i don't have any CLID/DNIS number available.
> Any other idea?
> Is there a way i can cause lcp renegotiation like in l2tp termination?


> _______________________________________________
> cisco-nas mailing list
> cisco-nas at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nas