[cisco-nas] RE: LSDO vrf aware...

[Oliver Boehmer (oboehmer)]

Rainer Clasen <mailto:bj at zuto.de> wrote on Thursday, June 09, 2005 12:21
PM:

> Oliver Boehmer (oboehmer) wrote:
>> Rainer Clasen <> wrote on Thursday, June 09, 2005 10:46 AM:
>>> we're already using LSDO and vrf on some of our 3640s - but so far
>>> we had no luck combining both.
>> 
>> Cisco-avpair = "ip:route=vrf bar 10.1.2.0 255.255.255.0 Dialer1 name
>> baz"
> 
> This works fine. Thanks alot.

one more comment: LSDO vrf-aware is only supported for L2TP Dial-out, so
if you're using this directly on an ISDN box, you're on your own..

	oli