[cisco-nas] Siemens ADSL modem - default settings

[Andris Zarins]

I'd say that DSLAM should know what PVC to use, and settings on DSLAM
and DSL modem must match. So I can't tell DSLAM to use PVC x/x and
configure modem on y/y and expect it to work. If this is not true and I
can say DSLAM what PVC to use and DSL modem gets this info - this would
be great. As I have no manual for this Siemens Xpresslink thing - I
don't know if this is true. 

Andris





-----Original Message-----
From: Gert Doering [mailto:gert at greenie.muc.de] 
Sent: Tuesday, March 29, 2005 3:21 PM
To: Andris Zarins
Cc: Gert Doering; cisco-nas at puck.nether.net
Subject: Re: [cisco-nas] Siemens ADSL modem - default settings

Hi,

On Tue, Mar 29, 2005 at 03:19:32PM +0300, Andris Zarins wrote:
> Nop, Ericsson's . I believe DSLAM is OK, because other customers are
> working fine (with Ericsson DSL modems). But I'd like to connect a
> Siemens modem to it. 

What VPI/VCI values you need depends on the settings in the DSLAM.

gert

-- 
USENET is *not* the non-clickable part of WWW!
 
//www.muc.de/~gert/
Gert Doering - Munich, Germany
gert at greenie.muc.de
fax: +49-89-35655025
gert at net.informatik.tu-muenchen.de