[Fwd: [cisco-nas] Back to Back ISDN PRI connection.]

[Oliver Boehmer (oboehmer)]

> 
> I saw a posting on the Cisco-Nas site about a e1 to e1 configuration.
> I am looking to do this with an AS 5300.
> 
> You mentioned you had a sample config.  Could you send what you have?
> we can seem to get ours working.

all you need is "isdn protocol-emulate network" as well as "isdn
switch-type primary-net5" or "isdn switch-type primary-ni" on the
network side. The user side is configured the same as if you got your E1
from a Telco..

	oli