[cisco-nas] [c-nsp] IP NAT Pool with 2 serials

[Mounir Mohamed]

Dear Oliver,

Thank you very evry much,

As your usual behavior à very helpful :)



Best Regards,
Mounir Mohamed



On 3/13/06, Oliver Boehmer (oboehmer) <oboehmer at cisco.com> wrote:
>
> Mounir Mohamed <> wrote on Monday, March 13, 2006 10:24 AM:
>
> > Dear All,
> >
> > One of the customers owned internet Link from our ISP and another
> > Link from another provider and he need to configure tow NAT pools
> > each of them matches the same customer LAN and but assigning
> > different IPs (POOl1=ISP1 & POOL2=ISP2) and he laso need if one of
> > the providers serial failed the customer using the active provider
> > POOL
>
> check out http://www.ciscotaccc.com/iprout/showcase?case=K81227071 for a
> sample config on how to achieve this.
>
>        oli
>



--
Best Reagrds,
Mounir Mohamed
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-nas/attachments/20060313/9059032c/attachment.html