[cisco-nas] Cisco Cat6k, PIX Power

[Paul Stewart]

Depends on which power supplies you put into them.  With the PIX 535
here's the info:
 
POWER

Input (per power supply)

* Range line voltage: 100V to 240V AC or 48V DC

* Nominal line voltage: 100V to 240V AC or 48V DC

* Current: 4-2 A

* Frequency: 50 to 60 Hz, single phase

* Power: 220W (dual hot swap power supply capable)

Output

* Steady state: 135W

* Maximum peak: 220W

* Maximum heat dissipation: 750 BTU/hr, full power usage (220W)

 

For the 7513 and 6509's, it can be AC or DC, single or dual, and varying
power requirements depending on what you put in the chassis.  Does this
help?

 

Paul Stewart
IP Routing/Switching
Nexicom Inc.
http://www.nexicom.net/ 


________________________________

From: cisco-nas-bounces at puck.nether.net
[mailto:cisco-nas-bounces at puck.nether.net] On Behalf Of Mounir Mohamed
Sent: Tuesday, March 14, 2006 8:28 AM
To: cisco-nas at puck.nether.net; cisco-nsp at puck.nether.net
Subject: [cisco-nas] Cisco Cat6k, PIX Power



Dear All,

I need to know the power Requirements for Cisco Cat6509, PIX 535 and
C7513.

-- 
Best Reagrds,
Mounir Mohamed 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-nas/attachments/20060314/a89ba0f9/attachment.html