[cisco-nas] Cisco 7206VXR for BBA

[Paul Stewart]

Hi there..

We have a Cisco 7206VXR that is currently doing broadband aggregation
for our ADSL services.... It uses our Cistron radius servers for
authentication and accounting with no problem.....

Now, we have a need to bring on a proxy-radius setup because we have a
customer who wants to wholesale DSL services from us and they run their
own radius servers.  Proxy radius seems to be the best way to offer this
(long theads on cisco-nsp about that topic) so have some questions....

It seems that we need to use [ cisco-avpair = "ip:addr-pool=POOL-A" ] on
the radius side to instruct the router to use a specific pool such as [
ip local pool POOL-A <start-ip> <end-ip> ]

Because this is proxy radius, how do we send this attribute back to the
router based on the realm name??  I realize this is probably a
discussion for the Cistron list but wanted to start here first...
The user is going to connect, get an ack or nack from the remote radius
server - but then how do we tell it to specifically send back a
cisco-avpair based on the realm name??

Basically, stepping back a bit... We have three user at realm coming in
across the same physical connection.  Our requirement is to take one of
these realms and have it use it's own radius servers and ip pools.

Thanks for any input...

Paul Stewart
Network Administrator
Nexicom Inc.
http://www.nexicom.net/