[cisco-nas] ISDN PRI back-to-back - again

[Nemec Ladislav]

It seems, that my probplem points to HW capability.

I'm using VWIC-2MFT-E1, and this module doesn't support data calls.

I have to use probably folowing feature:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124newft
/124limit/124x/124xc4/intserv.htm

 

Am I right?

 

L.

 

________________________________

From: Vince Mammoliti [mailto:vince at cisco.com] 
Sent: Wednesday, January 31, 2007 1:39 PM
To: Nemec Ladislav; cisco-nas at puck.nether.net
Subject: RE: [cisco-nas] ISDN PRI back-to-back - again

 

What is your configuration of both sides of the ISDN?

 

You need to place one side in Network Side.

 

V.

 

________________________________

From: cisco-nas-bounces at puck.nether.net
[mailto:cisco-nas-bounces at puck.nether.net] On Behalf Of Nemec Ladislav
Sent: Wednesday, January 31, 2007 7:15 AM
To: cisco-nas at puck.nether.net
Subject: [cisco-nas] ISDN PRI back-to-back - again

 

Hello,

I want to test some dialer watch scenario, but I don't have ISDN switch.
So I used back-to-back PRI connection between two routers.

On dialing router I received:

 

*Mar  2 13:55:37.372: ISDN Se1/0:15 Q931: TX -> SETUP pd = 8  callref =
0x3DC8 

        Bearer Capability i = 0x8890 

                Standard = CCITT 

                Transer Capability = Unrestricted Digital 

                Transfer Mode = Circuit 

                Transfer Rate = 64 kbit/s 

        Channel ID i = 0xA9839F 

                Exclusive, Channel 31 

        Called Party Number i = 0x81, '320' 

                Plan:ISDN, Type:Unknown

*Mar  2 13:55:37.388: ISDN Se1/0:15 Q931: RX <- CALL_PROC pd = 8
callref = 0xBDC8 

        Channel ID i = 0xA9839F 

                Exclusive, Channel 31

*Mar  2 13:55:37.392: ISDN Se1/0:15 Q931: RX <- CONNECT pd = 8  callref
= 0xBDC8 

        Channel ID i = 0xA9839F 

                Exclusive, Channel 31

*Mar  2 13:55:37.396: ISDN Se1/0:15 **ERROR**:
call_setup_ack_proceeding: NO HDLC available b channel 30 call id 0xBDC8

*Mar  2 13:55:37.400: ISDN  **ERROR**: Module-CCPRI
Function-CCPCC_CallReleasing  Error-Unknown event received in message
from L3 ono 1ebug isdn q931

*Mar  2 13:55:37.404: ISDN Se1/0:15 Q931: TX -> DISCONNECT pd = 8
callref = 0x3DC8 

        Cause i = 0x80A2 - No circuit/channel available

*Mar  2 13:55:37.412: ISDN Se1/0:15 Q931: RX <- RELEASE pd = 8  callref
= 0xBDC8

*Mar  2 13:55:37.420: ISDN Se1/0:15 Q931: TX -> RELEASE_COMP pd = 8
callref = 0x3DC8

*Mar  2 13:55:37.424: ISDN Se1/0:15 Q931: Applying typeplan for sw-type
0x12 is 0x0 0x1, Called num 320

 

 

I don't know, why dialing router is still disconnecting call, if
opposite router accept call. Cause is "No circuit/channel available",
but there is no more calls.

 

 

Laco Nemec.

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-nas/attachments/20070131/bf0a3c12/attachment.html