[cisco-nas] [Fwd: Re: Modems not responding on cisco AS5300.]

[Joseph Mays]

Whoops. Brain failure on my part there. Thanks.

----- Original Message ----- 
From: "Aaron Leonard" <Aaron at cisco.com>
To: "Joseph Mays" <mays at win.net>
Cc: <mtinka at globaltransit.net>; "'cisco-nas'" <cisco-nas at puck.nether.net>
Sent: Friday, August 29, 2008 2:40 PM
Subject: Re: [cisco-nas] [Fwd: Re: Modems not responding on cisco AS5300.]


> My guess is that "aaa new-model" is missing.  Need that to see the
> "radius-server" commands.
>
> ----
>
>> I am looking at downgrade the IOS as suggested. In the meantime, 
>> different
>> issue on the same box. I'm trying to enter the radius setup, and it's
>> responding that no "radius-server" anything does not exist as a config
>> command. I list the commands and radius-server does not show up. But the 
>> IOS
>> is the exact same version we use on another set of boxes and the
>> radius-server commands work fine there.
>>
>>
>> ----- Original Message ----- 
>> From: "Aaron Leonard" <Aaron at cisco.com>
>> To: "Joseph Mays" <mays at win.net>
>> Cc: <mtinka at globaltransit.net>; "'cisco-nas'" <cisco-nas at puck.nether.net>
>> Sent: Wednesday, August 27, 2008 11:27 AM
>> Subject: Re: [cisco-nas] [Fwd: Re: Modems not responding on cisco 
>> AS5300.]
>>
>>
>>
>>> Btw, it is possible to dig up old 12.3(6d) or whatever ... that is, you
>>> could open a TAC case and TAC could dig it up for you.  (Otoh, the 5300
>>> is past Last Day of Support, so I guess you wouldn't be entitled to open
>>> a case in the first place ...)
>>>
>>> Not that I know of any reason offhand to run 12.3(6d) rather than
>>> 12.3(3i).
>>>
>>> ----
>>>
>>>
>>>> Possibly, if I knew where to get it. I don't think I can get IOS going
>>>> back
>>>> that far for an AS5300 from cisco anymore, can I?
>>>>
>>>> ----- Original Message ----- 
>>>> From: "Mark Tinka" <mtinka at globaltransit.net>
>>>> To: "Joseph Mays" <mays at win.net>
>>>> Cc: "Aaron Leonard" <Aaron at cisco.com>; "'cisco-nas'"
>>>> <cisco-nas at puck.nether.net>
>>>> Sent: Tuesday, August 26, 2008 10:55 PM
>>>> Subject: Re: [cisco-nas] [Fwd: Re: Modems not responding on cisco
>>>> AS5300.]
>>>>
>>>> On Tuesday 26 August 2008 23:55:51 Joseph Mays wrote:
>>>>
>>>>
>>>>
>>>>> The boxes are all running 12.3(16).
>>>>>
>>>>>
>>>> Would you willing to downgrade to 12.3(3)i (currently LD),
>>>> as well as installing MICA Portware 2.9.5.0?
>>>>
>>>> Cheers,
>>>>
>>>> Mark.
>>>>
>>>>
>