[cisco-nas] [Fwd: Re: Modems not responding on cisco AS5300.]

[Joseph Mays]

I am looking at downgrade the IOS as suggested. In the meantime, different 
issue on the same box. I'm trying to enter the radius setup, and it's 
responding that no "radius-server" anything does not exist as a config 
command. I list the commands and radius-server does not show up. But the IOS 
is the exact same version we use on another set of boxes and the 
radius-server commands work fine there.


----- Original Message ----- 
From: "Aaron Leonard" <Aaron at cisco.com>
To: "Joseph Mays" <mays at win.net>
Cc: <mtinka at globaltransit.net>; "'cisco-nas'" <cisco-nas at puck.nether.net>
Sent: Wednesday, August 27, 2008 11:27 AM
Subject: Re: [cisco-nas] [Fwd: Re: Modems not responding on cisco AS5300.]


> Btw, it is possible to dig up old 12.3(6d) or whatever ... that is, you
> could open a TAC case and TAC could dig it up for you.  (Otoh, the 5300
> is past Last Day of Support, so I guess you wouldn't be entitled to open
> a case in the first place ...)
>
> Not that I know of any reason offhand to run 12.3(6d) rather than 
> 12.3(3i).
>
> ----
>
>> Possibly, if I knew where to get it. I don't think I can get IOS going 
>> back
>> that far for an AS5300 from cisco anymore, can I?
>>
>> ----- Original Message ----- 
>> From: "Mark Tinka" <mtinka at globaltransit.net>
>> To: "Joseph Mays" <mays at win.net>
>> Cc: "Aaron Leonard" <Aaron at cisco.com>; "'cisco-nas'"
>> <cisco-nas at puck.nether.net>
>> Sent: Tuesday, August 26, 2008 10:55 PM
>> Subject: Re: [cisco-nas] [Fwd: Re: Modems not responding on cisco 
>> AS5300.]
>>
>> On Tuesday 26 August 2008 23:55:51 Joseph Mays wrote:
>>
>>
>>> The boxes are all running 12.3(16).
>>>
>>
>> Would you willing to downgrade to 12.3(3)i (currently LD),
>> as well as installing MICA Portware 2.9.5.0?
>>
>> Cheers,
>>
>> Mark.
>>
>