[cisco-nas] cisco AS5350 transcoding

[David Lin]

You should check the status of ISDN PRI. If that's up, check the dial-peers, including the codec. It should work without any problem.

Now I am using CUBE for transcoding which is IP-IP gateway mode.

HTH.

 

David

 

 


From: ahmadjamalkhan at hotmail.com
To: cisco-nas at puck.nether.net
Date: Wed, 11 Feb 2009 17:54:02 +0000
Subject: [cisco-nas] cisco AS5350 transcoding




Hi
 
I have cisco5350 , i need to do codec transcoding . In principle it can be done.Call from Voip (IP) to PRI -> PRI -> Voip(IP) I have been reading quite a few form , since this cisco is not 5350XM , unified border element is not present.
 
I have been working on this issue for a while , but can not get it working. I would appreciate if someone can help me with this.
I am posting my cisco config .
 
Also is there a command to see , where the call is failing. I use show call history voice breif, it tells me call attempt with either incompatible destination or no-route. but does not tell where is it failing either on Voip dial peer or pots. 
 
I will appreciate your help in this matter.
 
Thanks








Share your photos with Windows Live Photos - Free Try it Now!
_________________________________________________________________
So many new options, so little time. Windows Live Messenger.
http://www.microsoft.com/windows/windowslive/products/messenger.aspx
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-nas/attachments/20090225/f06704eb/attachment.html>