<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=windows-874">
<META content="MSHTML 6.00.2800.1400" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Dear All,</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I am using cisco 3640 and analog module for dial up
server. I have problem to get 3640 collecting Calling and Called ID from PSTN.
Could you please suggest how can I configure our NAS to collect such
information. The following is my modem csm log:</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<BLOCKQUOTE dir=ltr style="MARGIN-RIGHT: 0px">
<DIV><FONT face=Arial color=#0000ff size=2>ras3#sh modem csm 1/7<BR>Modem 1/7,
line 40 (analog)<BR>CSM status: CALL_ACTIVE<BR>CSM current state(0x00000006):
CONNECTED_STATE<BR>CSM last event: MODEM_CONNECTED, cause: 0x0000<BR>current
call thru CAS line; call_id 0, bchan_num -1<BR>The calling party phone
number:<BR>The called party phone number:<BR>wdt timer is not
activated<BR>invalid_events 0, wdt_timeouts 0<BR>ic_failure 43, ic_complete
363, oc_failure 0, oc_complete 0<BR>oc_busy 0, remote_link_disc 0, busyout 0,
modem_reset 0<BR>call started 2w3d, call ended 00:00:00, total modem active
time 3d03h<BR>tty_hwidb 0x6290B674, modem_tty 0x62909DCC, modem_pool
0x625C1BB0<BR>total pri d-channels 0, last used pri d-channel
0<BR>total_free_rbs_timeslot 0, total_busy_rbs_timeslot 0,
min_free_modem_threshold 6<BR></FONT></DIV></BLOCKQUOTE>
<DIV dir=ltr><FONT face=Arial color=#0000ff size=2><FONT color=#000000>As above
log, there is no value for called and calling party phone number.
</FONT></FONT></DIV>
<DIV dir=ltr><FONT face=Arial color=#0000ff size=2><FONT
color=#000000></FONT></FONT> </DIV>
<DIV dir=ltr><FONT face=Arial color=#0000ff size=2><FONT
color=#000000>Regards,</FONT></FONT></DIV>
<DIV dir=ltr><FONT face=Arial color=#0000ff size=2><FONT
color=#000000>Souphonh</FONT></DIV></FONT></BODY></HTML>