<br><font size=2 face="sans-serif">Hello,</font>
<br>
<br><font size=2 face="sans-serif">I have a problem for a migration of
a "old" application Point of Sales.</font>
<br><font size=2 face="sans-serif">Before , the terminal async with Zmodem
application is connected to a USR Robotics chassis in analogue (V32bis)
and ISDN ( the application terminal is the same : according to the client
we put a modem analogue or ISDN modem ) and USR Modems were connected to
a pad Telematics. Then the call is made in X.25 to the application server.</font>
<br>
<br><font size=2 face="sans-serif">I have AS5400HPX, configured with "resource-pool".</font>
<br><font size=2 face="sans-serif">I have succeeded to configure for analog
modem ( spe modem + autocommand pad ) but not for ISDN modem.</font>
<br><font size=2 face="sans-serif">I have tried with vty-async (LAPB-TA)
and resource-pool group but It doesn't works.</font>
<br><font size=2 face="sans-serif">Has someone a idea ?</font>
<br>
<br><font size=2 face="sans-serif">Thanks a lot.</font>
<br>
<br><font size=2 face="sans-serif">Best Regards...</font>
<br>
<br><font size=2 face="sans-serif">Bordin Patrick</font>
<br><font size=2 face="sans-serif">Cetrel S.A.</font>
<br><font size=2 face="sans-serif">www.cetrel.lu</font>
<br>
<br><font size=2 face="sans-serif">The config :</font>
<br>
<br>
<br><font size=2 face="Courier New">resource-pool enable</font>
<br><font size=2 face="Courier New">!</font>
<br><font size=2 face="Courier New">resource-pool group resource Krone</font>
<br><font size=2 face="Courier New"> range port 1/44</font>
<br><font size=2 face="Courier New">!</font>
<br><font size=2 face="Courier New">resource-pool group resource Krone-isdn</font>
<br><font size=2 face="Courier New"> range port 1/58</font>
<br><font size=2 face="Courier New">!</font>
<br><font size=2 face="Courier New">resource-pool profile customer Krone</font>
<br><font size=2 face="Courier New"> limit base-size all</font>
<br><font size=2 face="Courier New"> limit overflow-size 0</font>
<br><font size=2 face="Courier New"> resource Krone speech </font>
<br><font size=2 face="Courier New"> dnis group Krone</font>
<br><font size=2 face="Courier New">!</font>
<br><font size=2 face="Courier New">resource-pool profile customer Krone-isdn</font>
<br><font size=2 face="Courier New"> limit base-size all</font>
<br><font size=2 face="Courier New"> limit overflow-size 0</font>
<br><font size=2 face="Courier New"> resource Krone-isdn digital </font>
<br><font size=2 face="Courier New"> dnis group Krone-isdn</font>
<br><font size=2 face="Courier New">!</font>
<br><font size=2 face="Courier New">aaa new-model</font>
<br><font size=2 face="Courier New">!</font>
<br><font size=2 face="Courier New">!</font>
<br><font size=2 face="Courier New">aaa group server tacacs+ XXXXXXXX</font>
<br><font size=2 face="Courier New">aaa</font>
<br>
<br>
<br><font size=2 face="Courier New">calltracker enable</font>
<br><font size=2 face="Courier New">calltracker history max-size 360</font>
<br><font size=2 face="Courier New">calltracker call-record terse quiet</font>
<br><font size=2 face="Courier New">spe country germany</font>
<br><font size=2 face="Courier New">!</font>
<br><font size=2 face="Courier New">spe call-record modem</font>
<br><font size=2 face="Courier New">!</font>
<br><font size=2 face="Courier New">spe default-firmware spe-firmware-1</font>
<br><font size=2 face="Courier New">no ip source-route</font>
<br><font size=2 face="Courier New">!</font>
<br><font size=2 face="Courier New">!</font>
<br><font size=2 face="Courier New">x29 profile krone 1:0 2:0 3:2 4:6 5:0
6:0 7:0 8:0 9:0 12:0 13:0 14:0 15:0 16:0 17:0 18:0</font>
<br>
<br><font size=2 face="Courier New">vty-async</font>
<br><font size=2 face="Courier New">vty-async virtual-template 1</font>
<br>
<br><font size=2 face="Courier New">isdn switch-type primary-net5</font>
<br><font size=2 face="Courier New">!</font>
<br><font size=2 face="Courier New">x25 routing acknowledge local</font>
<br>
<br><font size=2 face="Courier New">modemcap entry krone:MSC=&F&D2E0s0=0s2=43s3=13s4=10s5=8s15=1s21=0s22=0s23=1s24=1s53=0s29=1s64=0</font>
<br>
<br><font size=2 face="Courier New">controller E1 7/3</font>
<br><font size=2 face="Courier New"> pri-group timeslots 1-31</font>
<br><font size=2 face="Courier New"> description ISDN PRI </font>
<br><font size=2 face="Courier New">!</font>
<br><font size=2 face="Courier New">ip tcp synwait-time 5</font>
<br><font size=2 face="Courier New">ip telnet source-interface Loopback0</font>
<br><font size=2 face="Courier New">ip tftp source-interface Loopback0</font>
<br><font size=2 face="Courier New">ip ssh version 2</font>
<br><font size=2 face="Courier New">ip scp server enable</font>
<br><font size=2 face="Courier New">! </font>
<br><font size=2 face="Courier New">!</font>
<br><font size=2 face="Courier New">!</font>
<br><font size=2 face="Courier New">!</font>
<br><font size=2 face="Courier New">interface Loopback0</font>
<br><font size=2 face="Courier New"> description Loopback Interface
for management</font>
<br><font size=2 face="Courier New"> ip address xxxxxxxxxxxxx 255.255.255.255</font>
<br><font size=2 face="Courier New">!</font>
<br><font size=2 face="Courier New">interface FastEthernet0/0</font>
<br><font size=2 face="Courier New"> description DMZ </font>
<br><font size=2 face="Courier New"> ip address ccccccccccccccc 255.255.255.0</font>
<br><font size=2 face="Courier New"> ip virtual-reassembly</font>
<br><font size=2 face="Courier New"> no ip route-cache cef</font>
<br><font size=2 face="Courier New"> no ip route-cache</font>
<br><font size=2 face="Courier New"> no ip mroute-cache</font>
<br><font size=2 face="Courier New"> duplex auto</font>
<br><font size=2 face="Courier New"> speed auto</font>
<br><font size=2 face="Courier New"> no cdp enable</font>
<br><font size=2 face="Courier New">!</font>
<br><font size=2 face="Courier New">interface Serial7/3:15</font>
<br><font size=2 face="Courier New"> description ISDN PRI</font>
<br><font size=2 face="Courier New"> no ip address</font>
<br><font size=2 face="Courier New"> encapsulation ppp</font>
<br><font size=2 face="Courier New"> dialer rotary-group 1</font>
<br><font size=2 face="Courier New"> dialer-group 1</font>
<br><font size=2 face="Courier New"> autodetect encapsulation v120
lapb-ta</font>
<br><font size=2 face="Courier New"> no snmp trap link-status</font>
<br><font size=2 face="Courier New"> isdn switch-type primary-net5</font>
<br><font size=2 face="Courier New"> isdn overlap-receiving T302 1500</font>
<br><font size=2 face="Courier New"> isdn incoming-voice modem</font>
<br><font size=2 face="Courier New"> no cdp enable</font>
<br><font size=2 face="Courier New">!</font>
<br><font size=2 face="Courier New">interface Virtual-Template1 </font>
<br><font size=2 face="Courier New"> ip unnumbered Loopback0</font>
<br><font size=2 face="Courier New"> no peer default ip address</font>
<br><font size=2 face="Courier New"> ppp authentication chap</font>
<br><font size=2 face="Courier New">!</font>
<br><font size=2 face="Courier New">interface Group-Async0</font>
<br><font size=2 face="Courier New"> no ip address</font>
<br><font size=2 face="Courier New"> encapsulation slip</font>
<br><font size=2 face="Courier New"> async mode interactive</font>
<br><font size=2 face="Courier New"> group-range 1/00 1/70</font>
<br>
<br><font size=2 face="Courier New">dialer dnis group Krone</font>
<br><font size=2 face="Courier New"> number yyyyyyyy</font>
<br><font size=2 face="Courier New"> call-type cas speech</font>
<br><font size=2 face="Courier New">!</font>
<br><font size=2 face="Courier New">dialer dnis group Krone-isdn</font>
<br><font size=2 face="Courier New"> number zzzzzzzz</font>
<br><font size=2 face="Courier New"> call-type cas digital</font>
<br><font size=2 face="Courier New">!</font>
<br><font size=2 face="Courier New">dialer-list 1 protocol ip permit</font>
<br>
<br><font size=2 face="Courier New">x25 route ^990101803.* hunt-group FEP
xot-keepalive-period 5 xot-keepalive-tries 3 </font>
<br><font size=2 face="Courier New">!</font>
<br><font size=2 face="Courier New">privilege exec level 0 pad</font>
<br><font size=2 face="Courier New">privilege exec level 0 telnet</font>
<br><font size=2 face="Courier New">privilege exec level 1 enable</font>
<br>
<br><font size=2 face="Courier New">line vty 0 4</font>
<br><font size=2 face="Courier New"> access-class 1 in</font>
<br><font size=2 face="Courier New"> logging synchronous level all</font>
<br><font size=2 face="Courier New"> login authentication TAC-CET</font>
<br><font size=2 face="Courier New"> transport preferred none</font>
<br><font size=2 face="Courier New"> transport input ssh</font>
<br><font size=2 face="Courier New"> transport output pad telnet</font>
<br><font size=2 face="Courier New"> escape-character 3</font>
<br><font size=2 face="Courier New">line vty 5 7</font>
<br><font size=2 face="Courier New"> autocommand pad 990101803
/cud ABRK /profile krone /quiet</font>
<br><font size=2 face="Courier New"> transport input v120 lapb-ta</font>
<br><font size=2 face="Courier New"> transport output pad</font>
<br>
<br><font size=2 face="Courier New">line 1/44</font>
<br><font size=2 face="Courier New"> session-timeout 1 </font>
<br><font size=2 face="Courier New"> no flush-at-activation</font>
<br><font size=2 face="Courier New"> authorization exec EMPTY</font>
<br><font size=2 face="Courier New"> login authentication EMPTY</font>
<br><font size=2 face="Courier New"> no modem callout</font>
<br><font size=2 face="Courier New"> modem Dialin</font>
<br><font size=2 face="Courier New"> modem autoconfigure type krone</font>
<br><font size=2 face="Courier New"> autocommand pad 990101803
/cud ABRK /profile krone /quiet</font>
<br><font size=2 face="Courier New"> transport preferred pad</font>
<br><font size=2 face="Courier New"> transport input all</font>
<br><font size=2 face="Courier New"> transport output pad</font>
<br><font size=2 face="Courier New"> escape-character NONE</font>
<br>
<br><font size=2 face="Courier New">line 1/58</font>
<br><font size=2 face="Courier New"> session-timeout 1 </font>
<br><font size=2 face="Courier New"> location libre</font>
<br><font size=2 face="Courier New"> no flush-at-activation</font>
<br><font size=2 face="Courier New"> authorization exec EMPTY</font>
<br><font size=2 face="Courier New"> login authentication EMPTY</font>
<br><font size=2 face="Courier New"> no modem callout</font>
<br><font size=2 face="Courier New"> modem Dialin</font>
<br><font size=2 face="Courier New"> modem autoconfigure type V120</font>
<br><font size=2 face="Courier New"> autocommand pad 990101803
/cud ABRK /profile krone /quiet</font>
<br><font size=2 face="Courier New"> transport preferred none</font>
<br><font size=2 face="Courier New"> transport input v120 lapb-ta</font>
<br><font size=2 face="Courier New"> transport output all</font>
<br><font size=2 face="Courier New"> escape-character NONE</font>
<br><font size=2 face="Courier New">end</font>
<br>
<p><span style="font-family:'Arial';font-size:8pt;">=======================================================================</span></p>
<p><span style="font-family:'Arial';font-size:8pt;">This electronic message is not binding on its sender nor on Cetrel S.A.</span></p>
<p><span style="font-family:'Arial';font-size:8pt;">Any use of information of this mail except the use by the addressee</span></p>
<p><span style="font-family:'Arial';font-size:8pt;">within his or her business relation with Cetrel is strictly forbidden</span></p>
<p><span style="font-family:'Arial';font-size:8pt;">CETREL S.A. L-2956 Luxembourg; Tel: 00352 35566-1; http://www.cetrel.lu</span></p>
<p><span style="font-family:'Arial';font-size:8pt;">=======================================================================</span></p>
<p><span style="font-family:'Arial';font-size:8pt;"> </span></p>