<br><font size=2 face="sans-serif">Hello Aaron,</font>
<br>
<br><font size=2 face="sans-serif">Ok for don't use resource-pool manager.</font>
<br><font size=2 face="sans-serif">But I have already configured aaa authentication
and authorization :</font>
<br>
<br>
<br><font size=2 face="Courier New">aaa new-model</font>
<br><font size=2 face="Courier New">!</font>
<br><font size=2 face="Courier New">!</font>
<br><font size=2 face="Courier New">aaa group server tacacs+ TACACS-CETREL</font>
<br><font size=2 face="Courier New"> server xxxxxxxxxxxx</font>
<br><font size=2 face="Courier New"> server xxxxxxxxxxxx</font>
<br><font size=2 face="Courier New">!</font>
<br><font size=2 face="Courier New">aaa authentication login TAC-CET group
TACACS-CETREL enable</font>
<br><font size=2 face="Courier New">aaa authentication login EMPTY none</font>
<br><font size=2 face="Courier New">aaa authentication enable default group
TACACS-CETREL enable</font>
<br><font size=2 face="Courier New">aaa authorization exec default group
TACACS-CETREL none </font>
<br><font size=2 face="Courier New">aaa authorization exec EMPTY none </font>
<br><font size=2 face="Courier New">aaa authorization exec TAC-CET group
TACACS-CETREL local </font>
<br><font size=2 face="Courier New">!</font>
<br>
<br>
<br><font size=2 face="sans-serif">And when I configured </font>
<br>
<br><tt><font size=3>username 11111111 nopassword dnis<br>
username 11111111 autocommand pad 990101803 /cud ABRK /profile krone /quiet</font></tt>
<br>
<br>
<br><font size=2 face="sans-serif">I have this debug :</font>
<br>
<br>
<br><font size=2 face="Courier New">May 13 17:05:17.135: ISDN Se7/3:15
Q931: RX <- SETUP pd = 8 callref = 0x6A9A </font>
<br><font size=2 face="Courier New"> Bearer
Capability i = 0x8890 </font>
<br><font size=2 face="Courier New">
Standard = CCITT </font>
<br><font size=2 face="Courier New">
Transfer Capability = Unrestricted Digital </font>
<br><font size=2 face="Courier New">
Transfer Mode = Circuit </font>
<br><font size=2 face="Courier New">
Transfer Rate = 64 kbit/s </font>
<br><font size=2 face="Courier New"> Channel
ID i = 0xA9839D </font>
<br><font size=2 face="Courier New">
Exclusive, Channel 29 </font>
<br><font size=2 face="Courier New"> Calling
Party Number i = 0x0081, '999999999' </font>
<br><font size=2 face="Courier New">
Plan:Unknown, Type:Unknown </font>
<br><font size=2 face="Courier New"> Called
Party Number i = 0xC1, '11111111' </font>
<br><font size=2 face="Courier New">
Plan:ISDN, Type:Subscriber(local)</font>
<br><font size=2 face="Courier New">May 13 17:05:17.135: ISDN Se7/3:15
EVENT: process_rxstate: ces/callid 1/0x124 calltype 1 CALL_INCOMING</font>
<br><font size=2 face="Courier New">May 13 17:05:17.135: ISDN Se7/3:15
EVENT: call_incoming: call_id 0x0124, Guid = 4D904F3D8124</font>
<br><font size=2 face="Courier New">May 13 17:05:17.135: AAA/BIND(0000015D):
Bind i/f Serial7/3:28 </font>
<br><font size=2 face="Courier New">May 13 17:05:17.135: AAA/ACCT/DS0:
channel=28, ds1=3, t3=0, slot=7, ds0=117452828</font>
<br><font size=2 face="Courier New">May 13 17:05:17.135: AAA/ACCT/DS0:
channel=28, ds1=3, t3=0, slot=7, ds0=117452828</font>
<br><font size=2 face="Courier New">May 13 17:05:17.135: ISDN Se7/3:15
Q931: TX -> CALL_PROC pd = 8 callref = 0xEA9A </font>
<br><font size=2 face="Courier New"> Channel
ID i = 0xA9839D </font>
<br><font size=2 face="Courier New">
Exclusive, Channel 29</font>
<br><font size=2 face="Courier New">May 13 17:05:17.139: AAA: parse name=DS0:0:7:3:28
idb type=-1 tty=-1</font>
<br><font size=2 face="Courier New">May 13 17:05:17.139: AAA/MEMORY: create_user
(0x6606ED54) user='11111111' ruser='NULL' ds0=0 port='DS0:0:7:3:28' rem_addr='999999999'
authen_type=NONE service=NONE priv=0 initial_task_id='0', vrf= (id=0)</font>
<br><font size=2 face="Courier New">May 13 17:05:17.139: DS0:0:7:3:28 AAA/AUTHOR/RM
call-accept(3726381892): Port='DS0:0:7:3:28' list='default' service=RM</font>
<br><font size=2 face="Courier New">May 13 17:05:17.139: AAA/AUTHOR/RM
call-accept: DS0:0:7:3:28(3726381892) user='11111111'</font>
<br><font size=2 face="Courier New">May 13 17:05:17.139: DS0:0:7:3:28 AAA/AUTHOR/RM
call-accept(3726381892): send AV service=resource-management</font>
<br><font size=2 face="Courier New">May 13 17:05:17.139: DS0:0:7:3:28 AAA/AUTHOR/RM
call-accept(3726381892): send AV protocol=call-accept</font>
<br><font size=2 face="Courier New">May 13 17:05:17.139: DS0:0:7:3:28 AAA/AUTHOR/RM
call-accept(3726381892): send AV rm-protocol-version=1.0</font>
<br><font size=2 face="Courier New">May 13 17:05:17.139: DS0:0:7:3:28 AAA/AUTHOR/RM
call-accept(3726381892): send AV rm-nas-state=1661397100</font>
<br><font size=2 face="Courier New">May 13 17:05:17.139: DS0:0:7:3:28 AAA/AUTHOR/RM
call-accept(3726381892): send AV rm-call-type=digital</font>
<br><font size=2 face="Courier New">May 13 17:05:17.139: DS0:0:7:3:28 AAA/AUTHOR/RM
call-accept(3726381892): send AV rm-request-type=dial-in</font>
<br><font size=2 face="Courier New">May 13 17:05:17.139: DS0:0:7:3:28 AAA/AUTHOR/RM
call-accept(3726381892): send AV rm-link-type=isdn</font>
<br><font size=2 face="Courier New">May 13 17:05:17.139: AAA/AUTHOR/RM
call-accept(3726381892) no method list defined</font>
<br><font size=2 face="Courier New"> Type "resource-manager"
list "default". Using method "local"</font>
<br><font size=2 face="Courier New">May 13 17:05:17.139: DS0:0:7:3:28 AAA/AUTHOR/RM
call-accept(3726381892): Method=LOCAL</font>
<br><font size=2 face="Courier New">May 13 17:05:17.139: DS0:0:7:3:28 AAA/AUTHOR/RM/local
(3726381892): Received DNIS=11111111</font>
<br><font size=2 face="Courier New">May 13 17:05:17.139: DS0:0:7:3:28 AAA/AUTHOR/RM/local
(3726381892): Received CLID=999999999</font>
<br><font size=2 face="Courier New">May 13 17:05:17.139: DS0:0:7:3:28 AAA/AUTHOR/RM/local
(3726381892): Received Port=DS0:0:7:3:28</font>
<br><font size=2 face="Courier New">May 13 17:05:17.139: DS0:0:7:3:28 AAA/AUTHOR/RM/local
(3726381892): Received AV service=resource-management</font>
<br><font size=2 face="Courier New">May 13 17:05:17.139: DS0:0:7:3:28 AAA/AUTHOR/RM/local
(3726381892): Received AV protocol=call-accept</font>
<br><font size=2 face="Courier New">May 13 17:05:17.139: DS0:0:7:3:28 AAA/AUTHOR/RM/local
(3726381892): Received AV rm-protocol-version=1.0</font>
<br><font size=2 face="Courier New">May 13 17:05:17.139: DS0:0:7:3:28 AAA/AUTHOR/RM/local
(3726381892): Received AV rm-nas-state=1661397100</font>
<br><font size=2 face="Courier New">May 13 17:05:17.139: DS0:0:7:3:28 AAA/AUTHOR/RM/local
(3726381892): Received AV rm-call-type=digital</font>
<br><font size=2 face="Courier New">May 13 17:05:17.139: DS0:0:7:3:28 AAA/AUTHOR/RM/local
(3726381892): Received AV rm-request-type=dial-in</font>
<br><font size=2 face="Courier New">May 13 17:05:17.139: DS0:0:7:3:28 AAA/AUTHOR/RM/local
(3726381892): Received AV rm-link-type=isdn</font>
<br><font size=2 face="Courier New">May 13 17:05:17.139: AAA/AUTHOR (3726381892):
Post authorization status = FAIL</font>
<br><font size=2 face="Courier New">May 13 17:05:17.139: DS0:0:7:3:28 AAA/AUTHOR/RM/call-accept
(3726381892): Processing AV service=resource-management</font>
<br><font size=2 face="Courier New">May 13 17:05:17.139: DS0:0:7:3:28 AAA/AUTHOR/RM/call-accept
(3726381892): Processing AV protocol=call-accept</font>
<br><font size=2 face="Courier New">May 13 17:05:17.139: DS0:0:7:3:28 AAA/AUTHOR/RM/call-accept
(3726381892): Processing AV rm-protocol-version=1.0</font>
<br><font size=2 face="Courier New">May 13 17:05:17.139: DS0:0:7:3:28 AAA/AUTHOR/RM/call-accept
(3726381892): Processing AV server-name*local</font>
<br><font size=2 face="Courier New">May 13 17:05:17.139: DS0:0:7:3:28 AAA/AUTHOR/RM/call-accept
(3726381892): Processing AV rm-response-code=no-customer-profile</font>
<br><font size=2 face="Courier New">May 13 17:05:17.139: DS0:0:7:3:28 AAA/AUTHOR/RM/call-accept
(3726381892): Processing AV rm-call-handle=290</font>
<br><font size=2 face="Courier New">May 13 17:05:17.139: DS0:0:7:3:28 AAA/AUTHOR/RM/call-accept
(3726381892): Processing AV rm-call-treatment=cna</font>
<br><font size=2 face="Courier New">May 13 17:05:17.139: DS0:0:7:3:28 AAA/AUTHOR/RM/call-accept
(3726381892): Processing AV rm-call-type=digital</font>
<br><font size=2 face="Courier New">May 13 17:05:17.139: DS0:0:7:3:28 AAA/AUTHOR/RM/call-accept
(3726381892): Processing AV rm-nas-state=1661397100</font>
<br><font size=2 face="Courier New">May 13 17:05:17.139: DS0:0:7:3:28 AAA/AUTHOR/RM
(3726381892): authorization failed. Disallow call.</font>
<br><font size=2 face="Courier New">May 13 17:05:17.139: AAA/SERVERMSG:
DS0:0:7:3:28 AAA/AUTHOR/RM: ERROR in local-rm-authorization</font>
<br><font size=2 face="Courier New">May 13 17:05:17.139: AAA/MEMORY: free_user
(0x6606ED54) user='11111111' ruser='NULL' port='DS0:0:7:3:28' rem_addr='999999999'
authen_type=NONE service=NONE priv=0 vrf= (id=0)</font>
<br><font size=2 face="Courier New">May 13 17:05:17.143: ISDN Se7/3:15
EVENT: UserIdle: callid 0x124 received REJECT_CALL (0x14)</font>
<br><font size=2 face="Courier New">sigma#</font>
<br><font size=2 face="Courier New">May 13 17:05:17.143: ISDN Se7/3:15
**ERROR**: process_dialer_command: Resource Manager/Caller ID screening
failed, rejecting call</font>
<br><font size=2 face="Courier New">May 13 17:05:17.143: ISDN Se7/3:15
Q931: TX -> DISCONNECT pd = 8 callref = 0xEA9A </font>
<br><font size=2 face="Courier New"> Cause i
= 0x80AC - Requested circuit/channel not available</font>
<br><font size=2 face="Courier New">May 13 17:05:17.207: ISDN Se7/3:15
Q931: RX <- RELEASE pd = 8 callref = 0x6A9A</font>
<br><font size=2 face="Courier New">May 13 17:05:17.211: ISDN Se7/3:15
EVENT: process_rxstate: ces/callid 1/0x124 calltype 1 CALL_CLEARED</font>
<br><font size=2 face="Courier New">May 13 17:05:17.211: AAA/ACCT/DS0:
channel=28, ds1=3, t3=0, slot=7, ds0=117452828</font>
<br><font size=2 face="Courier New">May 13 17:05:17.211: ISDN Se7/3:15
Q931: TX -> RELEASE_COMP pd = 8 callref = 0xEA9A</font>
<br><font size=2 face="Courier New">sigma#</font>
<br>
<br>
<br><font size=2 face="sans-serif">We can see that the user is sending
to the service "resource-manager". </font>
<br>
<br><font size=2 face="sans-serif">Question : "resource-management"
is it "resource-pool management" ?</font>
<br>
<br><font size=2 face="sans-serif">Why it does not work ?</font>
<br>
<br><font size=2 face="sans-serif">Thanks a lot.</font>
<br>
<br><font size=2 face="sans-serif">Patrick.</font>
<br>
<br>
<br>
<br>
<br>
<br>
<table width=100%>
<tr valign=top>
<td width=40%><font size=1 face="sans-serif"><b>Aaron Leonard <Aaron@cisco.com></b>
</font>
<p><font size=1 face="sans-serif">12/05/2009 18:24</font>
<td width=59%>
<table width=100%>
<tr valign=top>
<td>
<div align=right><font size=1 face="sans-serif">To</font></div>
<td><font size=1 face="sans-serif">bordin@Cetrel.LU</font>
<tr valign=top>
<td>
<div align=right><font size=1 face="sans-serif">cc</font></div>
<td><font size=1 face="sans-serif">cisco-nas@puck.nether.net</font>
<tr valign=top>
<td>
<div align=right><font size=1 face="sans-serif">Subject</font></div>
<td><font size=1 face="sans-serif">Re: [cisco-nas] Autocommand PAD over
ISDN</font></table>
<br>
<table>
<tr valign=top>
<td>
<td></table>
<br></table>
<br>
<br>
<br><font size=2 face="Courier New">---------------------------------------------------------------</font>
<p><font size=2 face="Courier New">ATTENTION ATTENTION ATTENTION ATTENTION
ATTENTION</font>
<p><font size=2 face="Courier New">Ce mail provient de l'exterieur (Internet).
Ne prenez aucune</font>
<p><font size=2 face="Courier New">action basee uniquement sur le contenu
de ce mail, meme si</font>
<p><font size=2 face="Courier New">l'auteur semble etre la direction! SEC</font>
<p><font size=2 face="Courier New">---------------------------------------------------------------</font>
<p><font size=2 face="Courier New"> </font>
<p><font size=3>Bordin,<br>
<br>
Here's a way that I like to do this sort of thing ... i.e. the case where
you have incoming modem calls, and based upon the called number, you want
to invoke different applications. Assuming that those applications
can be invoked via an exec command, then there is no need for RPM - just
do this:</font>
<br><tt><font size=3><br>
aaa new-model<br>
aaa authentication login default local radius<br>
aaa authentication ppp default radius local<br>
aaa authorization exec default local radius<br>
username 5554446164 nopassword dnis<br>
username 5554446164 autocommand pad 990101803 /cud ABRK /profile krone
/quiet <br>
username 5554446163 nopassword dnis<br>
username 5554446163 autocommand telnet 10.1.2.3<br>
</font></tt>
<br><font size=3>etc.<br>
<br>
Now, while troubleshooting this, don't use autocommand. Instead,
from the exec prompt, manually enter the "pad" (or whatever)
command. Meanwhile, from another exec prompt, have some debugs running,
so you can see what's going on. Once you have the pad (or whatever)
command working as desired, <b>then</b> you can put it into an autocommand.<br>
<br>
Hth,<br>
<br>
Aaron<br>
<br>
P.S. Don't use "no flush-at-activation" on modem lines intended
for character mode - this will tend to deliver garbage to the exec parser
or to your server application.<br>
<br>
</font>
<hr><font size=3 color=blue><u><br>
</u></font><a href=mailto:bordin@cetrel.lu><font size=3 color=blue><u>bordin@cetrel.lu</u></font></a><font size=3>
wrote: </font>
<br><font size=2 face="sans-serif"><br>
Hello,</font><font size=3> <br>
</font><font size=2 face="sans-serif"><br>
I have a problem for a migration of a "old" application Point
of Sales.</font><font size=3> </font><font size=2 face="sans-serif"><br>
Before , the terminal async with Zmodem application is connected to a USR
Robotics chassis in analogue (V32bis) and ISDN ( the application terminal
is the same : according to the client we put a modem analogue or ISDN modem
) and USR Modems were connected to a pad Telematics. Then the call is made
in X.25 to the application server.</font><font size=3> <br>
</font><font size=2 face="sans-serif"><br>
I have AS5400HPX, configured with "resource-pool".</font><font size=3>
</font><font size=2 face="sans-serif"><br>
I have succeeded to configure for analog modem ( spe modem + autocommand
pad ) but not for ISDN modem.</font><font size=3> </font><font size=2 face="sans-serif"><br>
I have tried with vty-async (LAPB-TA) and resource-pool group but It doesn't
works.</font><font size=3> </font><font size=2 face="sans-serif"><br>
Has someone a idea ?</font><font size=3> <br>
</font><font size=2 face="sans-serif"><br>
Thanks a lot.</font><font size=3> <br>
</font><font size=2 face="sans-serif"><br>
Best Regards...</font><font size=3> <br>
</font><font size=2 face="sans-serif"><br>
Bordin Patrick</font><font size=3> </font><font size=2 face="sans-serif"><br>
Cetrel S.A.</font><font size=3> </font><font size=2 color=blue face="sans-serif"><u><br>
</u></font><a href=http://www.cetrel.lu/><font size=2 color=blue face="sans-serif"><u>www.cetrel.lu</u></font></a><font size=3>
<br>
</font><font size=2 face="sans-serif"><br>
The config :</font><font size=3> <br>
<br>
</font><font size=2 face="Courier New"><br>
resource-pool enable</font><font size=3> </font><font size=2 face="Courier New"><br>
!</font><font size=3> </font><font size=2 face="Courier New"><br>
resource-pool group resource Krone</font><font size=3> </font><font size=2 face="Courier New"><br>
range port 1/44</font><font size=3> </font><font size=2 face="Courier New"><br>
!</font><font size=3> </font><font size=2 face="Courier New"><br>
resource-pool group resource Krone-isdn</font><font size=3> </font><font size=2 face="Courier New"><br>
range port 1/58</font><font size=3> </font><font size=2 face="Courier New"><br>
!</font><font size=3> </font><font size=2 face="Courier New"><br>
resource-pool profile customer Krone</font><font size=3> </font><font size=2 face="Courier New"><br>
limit base-size all</font><font size=3> </font><font size=2 face="Courier New"><br>
limit overflow-size 0</font><font size=3> </font><font size=2 face="Courier New"><br>
resource Krone speech </font><font size=3> </font><font size=2 face="Courier New"><br>
dnis group Krone</font><font size=3> </font><font size=2 face="Courier New"><br>
!</font><font size=3> </font><font size=2 face="Courier New"><br>
resource-pool profile customer Krone-isdn</font><font size=3> </font><font size=2 face="Courier New"><br>
limit base-size all</font><font size=3> </font><font size=2 face="Courier New"><br>
limit overflow-size 0</font><font size=3> </font><font size=2 face="Courier New"><br>
resource Krone-isdn digital </font><font size=3> </font><font size=2 face="Courier New"><br>
dnis group Krone-isdn</font><font size=3> </font><font size=2 face="Courier New"><br>
!</font><font size=3> </font><font size=2 face="Courier New"><br>
aaa new-model</font><font size=3> </font><font size=2 face="Courier New"><br>
!</font><font size=3> </font><font size=2 face="Courier New"><br>
!</font><font size=3> </font><font size=2 face="Courier New"><br>
aaa group server tacacs+ XXXXXXXX</font><font size=3> </font><font size=2 face="Courier New"><br>
aaa</font><font size=3> <br>
<br>
</font><font size=2 face="Courier New"><br>
calltracker enable</font><font size=3> </font><font size=2 face="Courier New"><br>
calltracker history max-size 360</font><font size=3> </font><font size=2 face="Courier New"><br>
calltracker call-record terse quiet</font><font size=3> </font><font size=2 face="Courier New"><br>
spe country germany</font><font size=3> </font><font size=2 face="Courier New"><br>
!</font><font size=3> </font><font size=2 face="Courier New"><br>
spe call-record modem</font><font size=3> </font><font size=2 face="Courier New"><br>
!</font><font size=3> </font><font size=2 face="Courier New"><br>
spe default-firmware spe-firmware-1</font><font size=3> </font><font size=2 face="Courier New"><br>
no ip source-route</font><font size=3> </font><font size=2 face="Courier New"><br>
!</font><font size=3> </font><font size=2 face="Courier New"><br>
!</font><font size=3> </font><font size=2 face="Courier New"><br>
x29 profile krone 1:0 2:0 3:2 4:6 5:0 6:0 7:0 8:0 9:0 12:0 13:0 14:0 15:0
16:0 17:0 18:0</font><font size=3> <br>
</font><font size=2 face="Courier New"><br>
vty-async</font><font size=3> </font><font size=2 face="Courier New"><br>
vty-async virtual-template 1</font><font size=3> <br>
</font><font size=2 face="Courier New"><br>
isdn switch-type primary-net5</font><font size=3> </font><font size=2 face="Courier New"><br>
!</font><font size=3> </font><font size=2 face="Courier New"><br>
x25 routing acknowledge local</font><font size=3> <br>
</font><font size=2 face="Courier New"><br>
modemcap entry krone:MSC=&F&D2E0s0=0s2=43s3=13s4=10s5=8s15=1s21=0s22=0s23=1s24=1s53=0s29=1s64=0</font><font size=3>
<br>
</font><font size=2 face="Courier New"><br>
controller E1 7/3</font><font size=3> </font><font size=2 face="Courier New"><br>
pri-group timeslots 1-31</font><font size=3> </font><font size=2 face="Courier New"><br>
description ISDN PRI <br>
!</font><font size=3> </font><font size=2 face="Courier New"><br>
ip tcp synwait-time 5</font><font size=3> </font><font size=2 face="Courier New"><br>
ip telnet source-interface Loopback0</font><font size=3> </font><font size=2 face="Courier New"><br>
ip tftp source-interface Loopback0</font><font size=3> </font><font size=2 face="Courier New"><br>
ip ssh version 2</font><font size=3> </font><font size=2 face="Courier New"><br>
ip scp server enable</font><font size=3> </font><font size=2 face="Courier New"><br>
! <br>
!</font><font size=3> </font><font size=2 face="Courier New"><br>
!</font><font size=3> </font><font size=2 face="Courier New"><br>
!</font><font size=3> </font><font size=2 face="Courier New"><br>
interface Loopback0</font><font size=3> </font><font size=2 face="Courier New"><br>
description Loopback Interface for management</font><font size=3> </font><font size=2 face="Courier New"><br>
ip address xxxxxxxxxxxxx 255.255.255.255</font><font size=3> </font><font size=2 face="Courier New"><br>
!</font><font size=3> </font><font size=2 face="Courier New"><br>
interface FastEthernet0/0</font><font size=3> </font><font size=2 face="Courier New"><br>
description DMZ <br>
ip address ccccccccccccccc 255.255.255.0</font><font size=3> </font><font size=2 face="Courier New"><br>
ip virtual-reassembly</font><font size=3> </font><font size=2 face="Courier New"><br>
no ip route-cache cef</font><font size=3> </font><font size=2 face="Courier New"><br>
no ip route-cache</font><font size=3> </font><font size=2 face="Courier New"><br>
no ip mroute-cache</font><font size=3> </font><font size=2 face="Courier New"><br>
duplex auto</font><font size=3> </font><font size=2 face="Courier New"><br>
speed auto</font><font size=3> </font><font size=2 face="Courier New"><br>
no cdp enable</font><font size=3> </font><font size=2 face="Courier New"><br>
!</font><font size=3> </font><font size=2 face="Courier New"><br>
interface Serial7/3:15</font><font size=3> </font><font size=2 face="Courier New"><br>
description ISDN PRI</font><font size=3> </font><font size=2 face="Courier New"><br>
no ip address</font><font size=3> </font><font size=2 face="Courier New"><br>
encapsulation ppp</font><font size=3> </font><font size=2 face="Courier New"><br>
dialer rotary-group 1</font><font size=3> </font><font size=2 face="Courier New"><br>
dialer-group 1</font><font size=3> </font><font size=2 face="Courier New"><br>
autodetect encapsulation v120 lapb-ta</font><font size=3> </font><font size=2 face="Courier New"><br>
no snmp trap link-status</font><font size=3> </font><font size=2 face="Courier New"><br>
isdn switch-type primary-net5</font><font size=3> </font><font size=2 face="Courier New"><br>
isdn overlap-receiving T302 1500</font><font size=3> </font><font size=2 face="Courier New"><br>
isdn incoming-voice modem</font><font size=3> </font><font size=2 face="Courier New"><br>
no cdp enable</font><font size=3> </font><font size=2 face="Courier New"><br>
!</font><font size=3> </font><font size=2 face="Courier New"><br>
interface Virtual-Template1 <br>
ip unnumbered Loopback0</font><font size=3> </font><font size=2 face="Courier New"><br>
no peer default ip address</font><font size=3> </font><font size=2 face="Courier New"><br>
ppp authentication chap</font><font size=3> </font><font size=2 face="Courier New"><br>
!</font><font size=3> </font><font size=2 face="Courier New"><br>
interface Group-Async0</font><font size=3> </font><font size=2 face="Courier New"><br>
no ip address</font><font size=3> </font><font size=2 face="Courier New"><br>
encapsulation slip</font><font size=3> </font><font size=2 face="Courier New"><br>
async mode interactive</font><font size=3> </font><font size=2 face="Courier New"><br>
group-range 1/00 1/70</font><font size=3> <br>
</font><font size=2 face="Courier New"><br>
dialer dnis group Krone</font><font size=3> </font><font size=2 face="Courier New"><br>
number yyyyyyyy</font><font size=3> </font><font size=2 face="Courier New"><br>
call-type cas speech</font><font size=3> </font><font size=2 face="Courier New"><br>
!</font><font size=3> </font><font size=2 face="Courier New"><br>
dialer dnis group Krone-isdn</font><font size=3> </font><font size=2 face="Courier New"><br>
number zzzzzzzz</font><font size=3> </font><font size=2 face="Courier New"><br>
call-type cas digital</font><font size=3> </font><font size=2 face="Courier New"><br>
!</font><font size=3> </font><font size=2 face="Courier New"><br>
dialer-list 1 protocol ip permit</font><font size=3> <br>
</font><font size=2 face="Courier New"><br>
x25 route ^990101803.* hunt-group FEP xot-keepalive-period 5 xot-keepalive-tries
3 <br>
!</font><font size=3> </font><font size=2 face="Courier New"><br>
privilege exec level 0 pad</font><font size=3> </font><font size=2 face="Courier New"><br>
privilege exec level 0 telnet</font><font size=3> </font><font size=2 face="Courier New"><br>
privilege exec level 1 enable</font><font size=3> <br>
</font><font size=2 face="Courier New"><br>
line vty 0 4</font><font size=3> </font><font size=2 face="Courier New"><br>
access-class 1 in</font><font size=3> </font><font size=2 face="Courier New"><br>
logging synchronous level all</font><font size=3> </font><font size=2 face="Courier New"><br>
login authentication TAC-CET</font><font size=3> </font><font size=2 face="Courier New"><br>
transport preferred none</font><font size=3> </font><font size=2 face="Courier New"><br>
transport input ssh</font><font size=3> </font><font size=2 face="Courier New"><br>
transport output pad telnet</font><font size=3> </font><font size=2 face="Courier New"><br>
escape-character 3</font><font size=3> </font><font size=2 face="Courier New"><br>
line vty 5 7</font><font size=3> </font><font size=2 face="Courier New"><br>
autocommand pad 990101803 /cud ABRK /profile krone /quiet</font><font size=3>
</font><font size=2 face="Courier New"><br>
transport input v120 lapb-ta</font><font size=3> </font><font size=2 face="Courier New"><br>
transport output pad</font><font size=3> <br>
</font><font size=2 face="Courier New"><br>
line 1/44</font><font size=3> </font><font size=2 face="Courier New"><br>
session-timeout 1 <br>
no flush-at-activation</font><font size=3> </font><font size=2 face="Courier New"><br>
authorization exec EMPTY</font><font size=3> </font><font size=2 face="Courier New"><br>
login authentication EMPTY</font><font size=3> </font><font size=2 face="Courier New"><br>
no modem callout</font><font size=3> </font><font size=2 face="Courier New"><br>
modem Dialin</font><font size=3> </font><font size=2 face="Courier New"><br>
modem autoconfigure type krone</font><font size=3> </font><font size=2 face="Courier New"><br>
autocommand pad 990101803 /cud ABRK /profile krone /quiet</font><font size=3>
</font><font size=2 face="Courier New"><br>
transport preferred pad</font><font size=3> </font><font size=2 face="Courier New"><br>
transport input all</font><font size=3> </font><font size=2 face="Courier New"><br>
transport output pad</font><font size=3> </font><font size=2 face="Courier New"><br>
escape-character NONE</font><font size=3> <br>
</font><font size=2 face="Courier New"><br>
line 1/58</font><font size=3> </font><font size=2 face="Courier New"><br>
session-timeout 1 <br>
location libre</font><font size=3> </font><font size=2 face="Courier New"><br>
no flush-at-activation</font><font size=3> </font><font size=2 face="Courier New"><br>
authorization exec EMPTY</font><font size=3> </font><font size=2 face="Courier New"><br>
login authentication EMPTY</font><font size=3> </font><font size=2 face="Courier New"><br>
no modem callout</font><font size=3> </font><font size=2 face="Courier New"><br>
modem Dialin</font><font size=3> </font><font size=2 face="Courier New"><br>
modem autoconfigure type V120</font><font size=3> </font><font size=2 face="Courier New"><br>
autocommand pad 990101803 /cud ABRK /profile krone /quiet</font><font size=3>
</font><font size=2 face="Courier New"><br>
transport preferred none</font><font size=3> </font><font size=2 face="Courier New"><br>
transport input v120 lapb-ta</font><font size=3> </font><font size=2 face="Courier New"><br>
transport output all</font><font size=3> </font><font size=2 face="Courier New"><br>
escape-character NONE</font><font size=3> </font><font size=2 face="Courier New"><br>
end</font><font size=3> </font>
<p><font size=1 face="Arial">=======================================================================</font>
<p><font size=1 face="Arial">This electronic message is not binding on
its sender nor on Cetrel S.A.</font>
<p><font size=1 face="Arial">Any use of information of this mail except
the use by the addressee</font>
<p><font size=1 face="Arial">within his or her business relation with Cetrel
is strictly forbidden</font>
<p><font size=1 face="Arial">CETREL S.A. L-2956 Luxembourg; Tel: 00352
35566-1; </font><a href=http://www.cetrel.lu/><font size=1 color=blue face="Arial"><u>http://www.cetrel.lu</u></font></a>
<p><font size=1 face="Arial">=======================================================================</font>
<p><font size=1 face="Arial"> </font>
<p><tt><font size=3><br>
</font></tt>
<hr><tt><font size=3><br>
_______________________________________________<br>
cisco-nas mailing list<br>
</font></tt><a href="mailto:cisco-nas@puck.nether.net"><tt><font size=3 color=blue><u>cisco-nas@puck.nether.net</u></font></tt></a><tt><font size=3><br>
</font></tt><a href="https://puck.nether.net/mailman/listinfo/cisco-nas"><tt><font size=3 color=blue><u>https://puck.nether.net/mailman/listinfo/cisco-nas</u></font></tt></a>
<p>