<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=iso-8859-1" http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 8.00.6001.19222">
<STYLE></STYLE>
</HEAD>
<BODY>
<DIV><FONT size=2 face=Arial>On the IAD2400 I have --</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face="Courier New">interface Serial1/0:23<BR> no ip
address<BR><FONT color=#008000> isdn switch-type
primary-ni<BR></FONT> isdn incoming-voice voice<BR> isdn map address
.T plan isdn type national<BR><FONT color=#008000> isdn
negotiate-bchan<BR></FONT> no cdp enable<BR></FONT></DIV>
<DIV><FONT size=2 face=Arial>and on the AS5400 I have --</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>interface Serial1/0:24:23<BR> no ip
address<BR><FONT color=#008000> isdn switch-type
primary-ni<BR></FONT> isdn protocol-emulate network<BR><FONT
color=#008000> isdn negotiate-bchan<BR></FONT> no isdn outgoing ie
redirecting-number<BR> no isdn incoming alerting
add-PI<BR> trunk-group WinnetOfficePri<BR> no cdp
enable<BR></FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>----- Original Message ----- </FONT>
<DIV><FONT size=2 face=Arial>From: "Tim Jackson" <</FONT><A
href="mailto:jackson.tim@gmail.com"><FONT size=2
face=Arial>jackson.tim@gmail.com</FONT></A><FONT size=2
face=Arial>></FONT></DIV>
<DIV><FONT size=2 face=Arial>To: "Joseph Mays" <</FONT><A
href="mailto:mays@win.net"><FONT size=2 face=Arial>mays@win.net</FONT></A><FONT
size=2 face=Arial>></FONT></DIV>
<DIV><FONT size=2 face=Arial>Cc: <</FONT><A
href="mailto:cisco-nas@puck.nether.net"><FONT size=2
face=Arial>cisco-nas@puck.nether.net</FONT></A><FONT size=2 face=Arial>>;
<</FONT><A href="mailto:cisco-nsp@puck.nether.net"><FONT size=2
face=Arial>cisco-nsp@puck.nether.net</FONT></A><FONT size=2
face=Arial>></FONT></DIV>
<DIV><FONT size=2 face=Arial>Sent: Tuesday, May 15, 2012 3:44 PM</FONT></DIV>
<DIV><FONT size=2 face=Arial>Subject: Re: [c-nsp] Call rejeciton from
Cisco</FONT></DIV></DIV>
<DIV><FONT face=Arial><BR><FONT size=2></FONT></FONT></DIV><A
href="http://www.cisco.com/en/US/docs/ios/12_2/dial/command/reference/drfisl2.html#wp1116673"><FONT
size=2
face=Arial>http://www.cisco.com/en/US/docs/ios/12_2/dial/command/reference/drfisl2.html#wp1116673</FONT></A><BR><BR><FONT
size=2 face=Arial>Usually "Cause i = 0x82E418 - Invalid information element
contents"<BR>means that it's not happy about it requesting an exclusive channel
vs<BR>preferred iirc..<BR><BR>Could also be a mismatched ISDN switch type? NI2 I
would assume on both?<BR><BR>On Tue, May 15, 2012 at 1:16 PM, Joseph Mays
<</FONT><A href="mailto:mays@win.net"><FONT size=2
face=Arial>mays@win.net</FONT></A><FONT size=2 face=Arial>> wrote:<BR>>
Disregard. I figured out how to get it to set the plan and type, but it's still
having the same problem.<BR>><BR>> 027789: 1w0d: ISDN Se1/0:24:23 Q931: RX
<- SETUP pd = 8 callref = 0x002D<BR>> Bearer Capability i =
0x9090A2<BR>> Standard = CCITT<BR>> Transer Capability = 3.1kHz
Audio<BR>> Transfer Mode = Circuit<BR>> Transfer Rate = 64 kbit/s<BR>>
Channel ID i = 0xE1818397<BR>> Preferred, Interface 1, Channel 23<BR>>
Progress Ind i = 0x8183 - Origination address is non-ISDN<BR>> Calling Party
Number i = 0x2183, '5025673005'<BR>> Plan:ISDN, Type:National<BR>> Called
Party Number i = 0xA1, '5023871095'<BR>> Plan:ISDN, Type:National<BR>>
027790: 1w0d: ISDN Se1/0:24:23 LIFd: LIF_StartTimer: timer (0x64FBB518), ticks
(30000), event (0x1250)<BR>> 027791: 1w0d: ISDN Se1/0:24:23 Q931d: L3_Go:
source = 0x20A, event = 0x241, call id = 0x0, int id = 0x0<BR>> 027792: 1w0d:
ISDN Se1/0:24:23 Q931d: L3_Go: call_id 0x300E cr 0x802D state 0 event 0x5 ces
1<BR>> 027793: 1w0d: ISDN Se1/0:24:23 Q931d: L3_ProcessEvent: callref =
0x802D SETUP:U0_Setup(nlcb)<BR>> 027794: 1w0d: ISDN Se1/0:24:23 Q931d:
L3_state_change: callref 0x802D old NULL_STATE, new CALL_PRESENT<BR>> 027795:
1w0d: ISDN Se1/0:24:23 Q931d: L3_Go: source = 0x400, event = 0x340, call id =
0x300E, int id = 0x0<BR>> 027796: 1w0d: ISDN Se1/0:24:23 Q931d: L3_Go:
call_id 0x300E cr 0x802D state 6 event 0x82 ces 1<BR>> 027797: 1w0d: ISDN
Se1/0:24:23 Q931d: L3_ProcessEvent: callref = 0x802D
CC_SETUP_REJ_REQ:U6_SetupRejReq(nlcb)<BR>> 027798: 1w0d: ISDN Se1/0:24:23
Q931d: L3_state_change: callref 0x802D old CALL_PRESENT, new NULL_STATE<BR>>
027799: 1w0d: ISDN Se1/0:24:23 LIFd: LIF_StartTimer: timer (0x65F432AC), ticks
(1000), event (0x1240)<BR>> 027800: 1w0d: ISDN Se1/0:24:23 Q931: TX ->
RELEASE_COMP pd = 8 callref = 0x802D<BR>> Cause i = 0x82E418 - Invalid
information element contents<BR>><BR>> ----- Original Message
-----<BR>> From: Joseph Mays<BR>> To: </FONT><A
href="mailto:cisco-nas@puck.nether.net"><FONT size=2
face=Arial>cisco-nas@puck.nether.net</FONT></A><FONT size=2 face=Arial> ;
</FONT><A href="mailto:cisco-nsp@puck.nether.net"><FONT size=2
face=Arial>cisco-nsp@puck.nether.net</FONT></A><BR><FONT size=2 face=Arial>>
Sent: Tuesday, May 15, 2012 2:08 PM<BR>> Subject: Re: Call rejeciton from
Cisco<BR>><BR>><BR>> On a related note, I am aware that part of the
problem might be that the called party number might be listed as plan unknown
and type unknown. I've been trying to figure out a way on the IAD 2400 to set
this to national and isdn for all outgoing calls, but the only way I can find to
do that is with translation rules, and those all seem to assume that the first
thing you want to do is search and replace part of the dialed number. I really
don't care what the dialed number is. Is there some way to match just on the
plan and type, or some way to set those values other than a translation
rule?<BR>> ----- Original Message -----<BR>> From: Joseph Mays<BR>> To:
</FONT><A href="mailto:cisco-nas@puck.nether.net"><FONT size=2
face=Arial>cisco-nas@puck.nether.net</FONT></A><FONT size=2 face=Arial> ;
</FONT><A href="mailto:cisco-nsp@puck.nether.net"><FONT size=2
face=Arial>cisco-nsp@puck.nether.net</FONT></A><BR><FONT size=2 face=Arial>>
Sent: Tuesday, May 15, 2012 1:42 PM<BR>> Subject: Call rejeciton from
Cisco<BR>><BR>><BR>> Hello. I am using an AS5400 to generate a PRI that
is then going to a CiscoIAD. So on the AS5400 side I have. The IAD only has 8
analog voice ports, so I am using the last 8 channels of the PRI for voice
ports, and the first 16 channels as a T1 for internet service.<BR>><BR>>
controller T1 1/0:24<BR>> framing esf<BR>> channel-group 0 timeslots 1-16
speed 64<BR>> loopback network ignore<BR>> pri-group timeslots
17-24<BR>><BR>> interface Serial1/0:24:0<BR>> ip address 216.24.28.249
255.255.255.252<BR>> encapsulation ppp<BR>> no cdp enable<BR>>
!<BR>> interface Serial1/0:24:23<BR>> no ip address<BR>> isdn
switch-type primary-ni<BR>> isdn protocol-emulate network<BR>> no isdn
outgoing ie redirecting-number<BR>> no isdn incoming alerting add-PI<BR>>
no cdp enable<BR>><BR>><BR>> On the IAD I have....<BR>><BR>>
controller T1 1/0<BR>> framing esf<BR>> linecode b8zs<BR>>
channel-group 0 timeslots 1-16 speed 64<BR>> pri-group timeslots 17-24 nfas_d
primary nfas_int 1 nfas_group 1<BR>><BR>> interface Serial1/0:0<BR>> ip
address 216.24.28.250 255.255.255.252<BR>> encapsulation ppp<BR>>
!<BR>> interface Serial1/0:23<BR>> no ip address<BR>> isdn switch-type
primary-ni<BR>> isdn incoming-voice voice<BR>> no cdp
enable<BR>><BR>> dial-peer voice 1 pots<BR>> description route calls to
ISDN<BR>> destination-pattern .T<BR>> port 1/0:23<BR>><BR>> The PRI
and TEI's seem to be up. The AS5400 has intermachine trunks connecting it to the
telco system and routes incoming and outgoing phone calls all day long, but when
I try to make an outgoing call from the Cisco IAD I see the IAD 2400 appear to
do the call setup and send the call out 1/0:23, but eventually I get a reject
with a cause code of "0x0", which isn't very helpful. I'm not even sure if the
error message is coming from the far end (the AS5400) or the near end (the
IAD2400).<BR>><BR>> Error output below with the reject highlighted in red.
It would seem that the called is being rejected for "Invalid information element
contents." I'm having a hard time determining which elements it considers
invalid, though. We've never generated our own PRI out to a client box before,
so any information anyone has would be greatly appreciated. Also, if anyone has
a config example of both ends of such an arrangement I would love to see
it.<BR>><BR>> 022127: 1w0d: ISDN Se1/0:24:23 Q931: RX <- SETUP pd = 8
callref = 0x002C<BR>> Bearer Capability i = 0x9090A2<BR>> Standard =
CCITT<BR>> Transer Capability = 3.1kHz Audio<BR>> Transfer Mode =
Circuit<BR>> Transfer Rate = 64 kbit/s<BR>> Channel ID i =
0xE1818397<BR>> Preferred, Interface 1, Channel 23<BR>> Progress Ind i =
0x8183 - Origination address is non-ISDN<BR>> Calling Party Number i =
0x2183, '5025673005'<BR>> Plan:ISDN, Type:National<BR>> Called Party
Number i = 0x80, '75023871095'<BR>> Plan:Unknown, Type:Unknown<BR>>
022128: 1w0d: ISDN Se1/0:24:23 LIFd: LIF_StartTimer: timer (0x64FBB518), ticks
(30000), event (0x1250)<BR>> 022129: 1w0d: ISDN Se1/0:24:23 Q931d: L3_Go:
source = 0x20A, event = 0x241, call id = 0x0, int id = 0x0<BR>> 022130: 1w0d:
ISDN Se1/0:24:23 Q931d: L3_Go: call_id 0x2F62 cr 0x802C state 0 event 0x5 ces
1<BR>> 022131: 1w0d: ISDN Se1/0:24:23 Q931d: L3_ProcessEvent: callref =
0x802C SETUP:U0_Setup(nlcb)<BR>> 022132: 1w0d: ISDN Se1/0:24:23 Q931d:
L3_state_change: callref 0x802C old NULL_STATE, new CALL_PRESENT<BR>> 022133:
1w0d: ISDN Se1/0:24:23 Q931d: L3_Go: source = 0x400, event = 0x340, call id =
0x2F62, int id = 0x0<BR>> 022134: 1w0d: ISDN Se1/0:24:23 Q931d: L3_Go:
call_id 0x2F62 cr 0x802C state 6 event 0x82 ces 1<BR>> 022135: 1w0d: ISDN
Se1/0:24:23 Q931d: L3_ProcessEvent: callref = 0x802C
CC_SETUP_REJ_REQ:U6_SetupRejReq(nlcb)<BR>> 022136: 1w0d: ISDN Se1/0:24:23
Q931d: L3_state_change: callref 0x802C old CALL_PRESENT, new NULL_STATE<BR>>
022137: 1w0d: ISDN Se1/0:24:23 LIFd: LIF_StartTimer: timer (0x65F432AC), ticks
(1000), event (0x1240)<BR>> 022138: 1w0d: ISDN Se1/0:24:23 Q931: TX ->
RELEASE_COMP pd = 8 callref = 0x802C<BR>> Cause i = 0x82E418 - Invalid
information element contents<BR>> 022139: 1w0d: ISDN Se1/0:24:23 LIFd:
LIF_StartTimer: timer (0x64FBB518), ticks (30000), event (0x1250)<BR>>
AMSS1#<BR>> _______________________________________________<BR>> cisco-nsp
mailing list </FONT><A href="mailto:cisco-nsp@puck.nether.net"><FONT size=2
face=Arial>cisco-nsp@puck.nether.net</FONT></A><BR><FONT size=2 face=Arial>>
</FONT><A href="https://puck.nether.net/mailman/listinfo/cisco-nsp"><FONT size=2
face=Arial>https://puck.nether.net/mailman/listinfo/cisco-nsp</FONT></A><BR><FONT
size=2 face=Arial>> archive at </FONT><A
href="http://puck.nether.net/pipermail/cisco-nsp/"><FONT size=2
face=Arial>http://puck.nether.net/pipermail/cisco-nsp/</FONT></A></BODY></HTML>