<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=iso-8859-1" http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 8.00.6001.19328">
<STYLE></STYLE>
</HEAD>
<BODY>
<DIV><FONT size=2 face=Arial>Trying to configure a ds0-group with loop start on
a 5400. The t1 in question connects to a channel bank that breaks the t1 out
into individual ds0's. The problem is that the 5400 is never sending a loop
start signal (0101) to the the channel bank, so the channel bank won't activate
the ds0. Is there any example anywhere of a t1 ds0 group and voice port
configuration for loop start that I can look at to figure out why I can't get
this to send a loop start?</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>Here is the t1 and voice-port so far.</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial></FONT><FONT size=2 face="Courier New">controller
T1 6/6<BR> framing esf<BR> linecode b8zs<BR> ds0-group 1
timeslots 1-24 type sas-loop-start<BR> cas-custom 1<BR> trunk-group
WNpots01<BR> description T1 1 to pots01.armplc.win.net channel
bank</FONT></DIV>
<DIV><FONT face="Courier New"></FONT> </DIV>
<DIV><FONT size=2 face="Courier New">voice-port
6/6:1<BR></FONT></DIV></BODY></HTML>