<div dir="ltr">Ah yes, that makes sense. Its all coming back to me... Been out of the SP game too long clearly.<div><br></div><div>I will play a bit more tomorrow with this. Thanks!</div></div><div class="gmail_extra"><br><div class="gmail_quote">On 31 January 2015 at 00:08, Mark Johnson (mljohnso) <span dir="ltr"><<a href="mailto:mljohnso@cisco.com" target="_blank">mljohnso@cisco.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div style="word-wrap:break-word;color:rgb(0,0,0);font-size:18px;font-family:Calibri,sans-serif">
<div>Yeah, the DM’s are only going to terminate analog calls. As Josh says (long time, Josh!), configure the PRI (or use Legacy DDR or Dialer Profiles) and you should be good.</div>
<div><br>
</div>
<div>mark</div>
<div><br>
</div>
<span>
<div style="font-family:Calibri;font-size:11pt;text-align:left;color:black;BORDER-BOTTOM:medium none;BORDER-LEFT:medium none;PADDING-BOTTOM:0in;PADDING-LEFT:0in;PADDING-RIGHT:0in;BORDER-TOP:#b5c4df 1pt solid;BORDER-RIGHT:medium none;PADDING-TOP:3pt">
<span style="font-weight:bold">From: </span>joshd <<a href="mailto:jduffek@gmail.com" target="_blank">jduffek@gmail.com</a>><br>
<span style="font-weight:bold">Date: </span>Friday, January 30, 2015 at 3:52 PM<br>
<span style="font-weight:bold">To: </span>Tom Storey <<a href="mailto:tom@snnap.net" target="_blank">tom@snnap.net</a>><br>
<span style="font-weight:bold">Cc: </span>Mark Johnson <<a href="mailto:mljohnso@cisco.com" target="_blank">mljohnso@cisco.com</a>>, "<a href="mailto:cisco-nas@puck.nether.net" target="_blank">cisco-nas@puck.nether.net</a>" <<a href="mailto:cisco-nas@puck.nether.net" target="_blank">cisco-nas@puck.nether.net</a>><br>
<span style="font-weight:bold">Subject: </span>Re: [cisco-nas] ISDN calls not making it to NM-6DM<br>
</div><div><div class="h5">
<div><br>
</div>
<div>
<div>
<div dir="ltr">
<div class="gmail_extra">
<div>
<div>
<div>If you just want to make it work, you can configure your IP stuff on the serial1/0:15 interface and the call should terminate there. ISDN to ISDN like.</div>
<div><br>
</div>
<div>Not sure how you would simulate a real analog modem type call from the 1841 side with what you have.</div>
<div><br>
</div>
<div>I could be wrong though, been a while...</div>
<div><br>
</div>
<div>jd.</div>
</div>
</div>
<br>
<div class="gmail_quote">On Fri, Jan 30, 2015 at 5:32 PM, Tom Storey <span dir="ltr">
<<a href="mailto:tom@snnap.net" target="_blank">tom@snnap.net</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div dir="ltr">Hi Mark, did not expect such a quick response!
<div><br>
</div>
<div>Indeed it is originating from the 1841 as 8890.
<div><br>
</div>
<div>I also re-configured the 1841 to do DoV, where the bearercap changed to 0x8090A3, and this was also seen as the incomming bearercap on the 3825.</div>
<div><br>
</div>
<div>I was under the impression from my reading that the NM-xDM could also terminate ISDN data calls, or have I got that wrong?</div>
<div><br>
</div>
<div>Cheers!</div>
</div>
</div>
<div>
<div>
<div class="gmail_extra"><br>
<div class="gmail_quote">On 30 January 2015 at 23:27, Mark Johnson (mljohnso) <span dir="ltr">
<<a href="mailto:mljohnso@cisco.com" target="_blank">mljohnso@cisco.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div style="word-wrap:break-word;color:rgb(0,0,0);font-size:18px;font-family:Calibri,sans-serif">
<div>A bearer cap of 0x8890 means the call is digital, not analog, so the call is not being passed to a modem. Your emulating network in between must be mucking with the bearer cap (check out debug on the 1841 to verify that it’s not originating at 8890).</div>
<div><br>
</div>
<div>mark</div>
<div><br>
</div>
<span>
<div style="font-family:Calibri;font-size:11pt;text-align:left;color:black;BORDER-BOTTOM:medium none;BORDER-LEFT:medium none;PADDING-BOTTOM:0in;PADDING-LEFT:0in;PADDING-RIGHT:0in;BORDER-TOP:#b5c4df 1pt solid;BORDER-RIGHT:medium none;PADDING-TOP:3pt">
<span style="font-weight:bold">From: </span>Tom Storey <<a href="mailto:tom@snnap.net" target="_blank">tom@snnap.net</a>><br>
<span style="font-weight:bold">Date: </span>Friday, January 30, 2015 at 3:13 PM<br>
<span style="font-weight:bold">To: </span>"<a href="mailto:cisco-nas@puck.nether.net" target="_blank">cisco-nas@puck.nether.net</a>" <<a href="mailto:cisco-nas@puck.nether.net" target="_blank">cisco-nas@puck.nether.net</a>><br>
<span style="font-weight:bold">Subject: </span>[cisco-nas] ISDN calls not making it to NM-6DM<br>
</div>
<div>
<div>
<div><br>
</div>
<div>
<div>
<div dir="ltr">Hi everyone.
<div><br>
</div>
<div>Playing around with some old hardware in a lab, trying to get some ISDN calls originated from an 1841 with a WIC-1B-S/T-V3 to be answered on a 3825 with a NM-6D and NM-CE1T1-PRI.</div>
<div><br>
</div>
<div>Heres my config:</div>
<div><br>
</div>
<div>
<div>controller E1 1/0</div>
<div> pri-group timeslots 1-6,16</div>
<div>!</div>
<div>interface Serial1/0:15</div>
<div> no ip address</div>
<div> encapsulation ppp</div>
<div> isdn switch-type primary-net5</div>
<div> isdn incoming-voice modem 64</div>
<div> isdn bchan-number-order ascending </div>
<div>!</div>
<div>interface Group-Async0</div>
<div> ip unnumbered Loopback0</div>
<div> ip nat inside</div>
<div> ip virtual-reassembly in</div>
<div> encapsulation ppp</div>
<div> peer default ip address pool dialup</div>
<div> async mode interactive</div>
<div> no keepalive</div>
<div> ppp authentication chap callin</div>
<div> group-range 2/0 2/5</div>
<div>!</div>
<div>line 2/0 2/5</div>
<div> modem InOut</div>
<div> autoselect ppp</div>
<div>!</div>
</div>
<div><br>
</div>
<div>And heres what I see when an ISDN call comes in:</div>
<div><br>
</div>
<div>
<div>*Jan 30 23:31:24.963 UTC: ISDN Se1/0:15 Q931: RX <- SETUP pd = 8 callref = 0x0183 </div>
<div><span style="white-space:pre-wrap"></span>Bearer Capability i = 0x8890 </div>
<div><span style="white-space:pre-wrap"></span>Standard = CCITT </div>
<div><span style="white-space:pre-wrap"></span>Transfer Capability = Unrestricted Digital </div>
<div><span style="white-space:pre-wrap"></span>Transfer Mode = Circuit </div>
<div><span style="white-space:pre-wrap"></span>Transfer Rate = 64 kbit/s </div>
<div><span style="white-space:pre-wrap"></span>Channel ID i = 0xA98381 </div>
<div><span style="white-space:pre-wrap"></span>Exclusive, Channel 1 </div>
<div><span style="white-space:pre-wrap"></span>Calling Party Number i = 0x80, '0733944124' </div>
<div><span style="white-space:pre-wrap"></span>Plan:Unknown, Type:Unknown </div>
<div><span style="white-space:pre-wrap"></span>Called Party Number i = 0x80 </div>
<div><span style="white-space:pre-wrap"></span>Plan:Unknown, Type:Unknown</div>
<div>*Jan 30 23:31:24.963 UTC: ISDN Se1/0:15 Q931: Received SETUP callref = 0x8183 callID = 0x01E5 switch = primary-net5 interface = User </div>
<div>*Jan 30 23:31:24.971 UTC: %ISDN-6-CONNECT: Interface Serial1/0:0 is now connected to 0733944124 N/A</div>
<div>*Jan 30 23:31:24.971 UTC: ISDN Se1/0:15 Q931: TX -> CALL_PROC pd = 8 callref = 0x8183 </div>
<div><span style="white-space:pre-wrap"></span>Channel ID i = 0xA98381 </div>
<div><span style="white-space:pre-wrap"></span>Exclusive, Channel 1</div>
<div>*Jan 30 23:31:24.971 UTC: ISDN Se1/0:15 Q931: TX -> CONNECT pd = 8 callref = 0x8183 </div>
<div><span style="white-space:pre-wrap"></span>Channel ID i = 0xA98381 </div>
<div><span style="white-space:pre-wrap"></span>Exclusive, Channel 1</div>
<div>*Jan 30 23:31:24.979 UTC: ISDN Se1/0:15 Q931: RX <- CONNECT_ACK pd = 8 callref = 0x0183</div>
</div>
<div><br>
</div>
<div>So as far as I can tell the call comes in and establishes fine, but even with "debug modem" and a couple of other debugs on, I dont see any activity regarding connection to a modem. When I dial in from an analogue modem it works just fine.</div>
<div><br>
</div>
<div>FWIW I am using the 3825 as a PSTN simulator as well. The 1841 is connected to a VIC2-2BRI-NT/TE emulating network, and a dialpeer connects calls to a VWIC2-2MTF-E1 which is also emulating network and is connected to the NM-CE1T1-PRI.</div>
<div><br>
</div>
<div>Wondering if any one can provide any pointers to help me out. Am I missing something obvious?</div>
<div><br>
</div>
<div>Let me know if you require more information.</div>
<div><br>
</div>
<div>Thanks</div>
<div>Tom</div>
</div>
</div>
</div>
</div>
</div>
</span></div>
</blockquote>
</div>
<br>
</div>
</div>
</div>
<br>
_______________________________________________<br>
cisco-nas mailing list<br>
<a href="mailto:cisco-nas@puck.nether.net" target="_blank">cisco-nas@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-nas" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-nas</a><br>
</blockquote>
</div>
<br>
</div>
</div>
</div>
</div>
</div></div></span>
</div>
</blockquote></div><br></div>