[nsp] rate limiting a switch port

[Brad Bonin (bbonin)]

Does the 6500 have an MSFC?  Are you running in native or hybrid mode?

brad@cisco.com

-----Original Message-----
From: cisco-nsp-admin@puck.nether.net
[mailto:cisco-nsp-admin@puck.nether.net] On Behalf Of matthew zeier
Sent: Thursday, August 01, 2002 12:54 PM
To: cisco-nsp@puck.nether.net
Subject: [nsp] rate limiting a switch port



On a 6500, what's the syntax to rate limit a port to 2Mbps?  I've read
through the docs but am having a tough time getting the syntax right.

Thanks.


--
matthew zeier                        | "In mathematics you don't
understand
InteleNet Communications, Inc.       |  things.  You just get used to
them."
(949) 784-7904                       |       - John von Newmann


_______________________________________________
cisco-nsp mailing list  real_name)s@puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/