[nsp] wic-1dsu-t1 back to back

[C. Jon Larsen]

You need a t1 crossover cable, and you need to set one of the wics to 
provide clocking. 

conf t
int ser 0
service module t1 clock source internal

A t1 crossover is pinned this way:

1 -> 4
2 -> 5
4 -> 1
5 -> 2

On Thu, 1 Aug 2002, Zed wrote:

> Hello,
> 
> We are migrating our test environment to our production, and need to do some
> testing.  In order to accomplish this, I need to figure out what kind of
> cable/pin-outs/extended commands I need for connecting two 2620's with
> WIC-1DSU-t1 back to back.
> 
> This doc on cisco's site describes the proceedure for a 2524, but even
> though I followed the procedure it did not work. Could someone please inform
> me as to the correct procedure/cable etc.?
> 
> http://www.cisco.com/warp/public/471/75.html
> 
> Very much appreciated!
> 
> 
> _______________________________________________
> cisco-nsp mailing list  real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 

-- 

C. Jon Larsen Chief Technology Officer, Richweb.com (804.307.6939)
SMTP: jlarsen@richweb.com (http://richweb.com/cjl_pgp_pub_key.txt)

Richweb.com:
Designing Open Source Internet Business Solutions since 1995
Building Safe, Secure, Reliable Cisco-Powered Networks since 1995