[nsp] configure command "do"

[Josh Duffek]

I thought I heard of a feature request for that...but not sure if it really
exists, cant find anything for it.

In my 12.2(10b) 2600 I see this:

joshd(config)#downward-compatible-config ?
  <0-999999>.<0-999999>  Version number

...which is what you are getting when you put in "do ?"...

josh


----- Original Message -----
From: "Stefan Reelsen" <stefan@reelsen.net>
To: <cisco-nsp@puck.nether.net>
Sent: Monday, July 29, 2002 9:23 AM
Subject: [nsp] configure command "do"


> Hello,
>
> somebody told me it would be possible to show the running-config out
> of the configuration mode with the command "do show run". With IOS
> 12.2.10b the system asks for <0-999999>.<0-999999>  Version number
> when enterering "do ?".
> Does anybody know what this means?
>
> Thanks.
>
>
> --
> Best regards,
>  Stefan                          mailto:stefan@reelsen.net
>
> _______________________________________________
> cisco-nsp mailing list  real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/