[nsp] ios recommendation for GSR12

[Jared Mauch]

	Looks like you can just use 12.0(22)S to me.

	Then you can turn on all the NSF features in the second
GRP.

	- Jared

On Thu, Aug 01, 2002 at 06:13:19AM -0700, Virendra O. Rode wrote:
> 
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> 
> hi there,
> 
> any ios recommendation for the following hw.
> 
> 
> GSR12/60 Cisco12012 GSR 60Gbps;1GRP,1CSC,3SFC,1DC
> GRP-B Route Processor, 128MB and 20MB Flash, ECC support
> MEM-GRP/LC-256 256MB GRP and L.C. Program/Route Memory (2x128MB)
> MEM-GRP-FL20 20MB PCMCIA Flash Memory
> GRP-B/R GSR Route Processor, Redundant Option
> MEM-GRP/LC-256 256MB GRP and L.C. Program/Route Memory (2x128MB)
> MEM-GRP-FL20 20MB PCMCIA Flash Memory
> GSR12-CSC/R Cisco 12012 Redundant GSR Scheduler/Fabric
> 3GE-GBIC-SC GSR12000 three-port GE line card
> MEM-DFT-GRP/LC-128 Default 128MB GRP and L.C. Program/Route Memory (1x128MB)
> GBIC-LH-SM 1000base-LX GBIC module
> GBIC-SX-MM 1000base-SX GBIC module, multimode,standardized for GSR12000
> LC-4OC3/POS-SM 4port OC3/STM1 Packet Over SONET/SDH Line Card, Single-Mode
> MEM-DFT-GRP/LC-128 Default 128MB GRP and L.C. Program/Route Memory (1x128MB)
> 8FE-TX-RJ45-B 8-port 100baseTX, RJ45 connector type, version B
> MEM-DFT-GRP/LC-128 Default 128MB GRP and L.C. Program/Route Memory (1x128MB)
> 
> 
> any insight will be appreciated.
> 
> 
> cheers,
> vicky
> -----BEGIN PGP SIGNATURE-----
> Version: PGP 7.0.1
> 
> iQA/AwUBPUkz7scbhMfUcgMTEQL/vACcCKcdhkheYsD2mHFnXpBUPaa962EAn0An
> Nb5rUupw0l5ITVblsoxKC7Lq
> =Z/R8
> -----END PGP SIGNATURE-----
> 
> _______________________________________________
> cisco-nsp mailing list  real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
Jared Mauch  | pgp key available via finger from jared@puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.