[nsp] Cisco commands automatically sent

[Bulger, Tim]

You probably want RANCID - http://www.shrubbery.net/rancid/

-----Original Message-----
From: odusseus [mailto:odusseus@voila.fr]=20
Sent: Friday, August 09, 2002 7:59 AM
To: cisco-nsp
Subject: [nsp] Cisco commands automatically sent


Hi,

+----------------+
| Unix box       |
| running a prog |
+----------------+
        |
        |
        |
        |
        V
+---------------------+
| Cisco device        |
| (router or switche) |
+---------------------+


I would like to know if it is possible to write a program on a Unix box
where it could automatically run some commands on a=20
cisco devices (7200 series and 3500XL) like:

enable
conf t
int fa0/1
shut
end

Thank you.

Regards,

Christophe
------------------------------------------

Faites un voeu et puis Voila ! www.voila.fr=20

_______________________________________________
cisco-nsp mailing list  real_name)s@puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/