[nsp] traceback

[Jared Mauch]

	You need to send it to the tac/cisco.

	they will then use the symbol files to map the hex numbers (PC)
to the function-name and address within that function that caused the
error.

	- Jared

On Thu, Aug 22, 2002 at 07:38:08AM +0200, odusseus wrote:
> Hi,
> 
> I would like to know if there is a way to understand a traceback message or if the only solution is to send it to the Cisco TAC ?
> 
> Thank you,
> 
> Regards.
> 
> Christophe
> ------------------------------------------
> 
> Faites un voeu et puis Voila ! www.voila.fr
> 
> _______________________________________________
> cisco-nsp mailing list  real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
Jared Mauch  | pgp key available via finger from jared@puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.