[nsp] wiered router problem

[prashant desai]

Hello All

     i am using cisco 2500 router , today i faced very 
wiered problem and wants to know if there is anyone here 
who has also faced the same sort of problem .

   router was working fine till today , but today suddenly 
what happend when i pingd the ethernet port of router it 
started giving me timeouts , so i called up my colouge who 
is sitting at the other office where the serial link from 
my router gets terminated , he had then telneted to the 
outer's serial port and he was able to telnet then from 
that termial only he tried to ping the router's ethernet 
port but it did't worked , so what i mean is when the user 
was connected to the router's serial port he was not able 
to ping the router's ethernet port. i tried rebooting the 
router for around 2-3 times but it didt worked out , during 
all these time the link for the router's ethernet port on 
my switch was showing the "up" status. i tried all the 
things changing cables etc but then also it didt worked out 
for around 2 hours, after two hours it again started 
working with out any change in either the config or the 
cable , 

  has anyone faced this sort of problem ever , i still have 
no clues k why this happened , would appritiate if some one 
can clarify the possible reasons .

   ya one more thing i have AUI port in the router , in 
which i have inserted my AUI to ethernet converter .and its 
also not faulty i mean its still working.

Thanx & Regards
Prashant Desai   


Go To http://www.iqara.net