[nsp] IOS upgrade

[Tejal Shah]

Use "show version" command on router to check which IOS is running and for
upgrade the ios
you have to give the commnad bootfile one.bin in router and reload so router
will get loaded with one.bin
IOS.

with regards
Tejal
----- Original Message -----
From: "prashant desai" <prashant.desai@iqara.net>
To: <cisco-nsp@puck.nether.net>
Sent: Saturday, August 24, 2002 6:40 PM
Subject: [nsp] IOS upgrade


> Hi
>
>    if i have two IOS images in my flash , how can i know k
> which IOS my router is using , other doubts is if i have
> ios 1 whose file name is one.bin and if i download other
> ios image file say two.bin from the tftp server then how
> can i instruct the router to boot from one.bin or from
> two.bin.  other thing is say if i take the back up of
> one.bin and then download two.bin on to the flash from the
> tftp server then after downloading what steps has to be
> taken so that i can sucessfully upgrade the IOS , and how
> can i confirm that the upgrade is sucessful
>
>
> i know these are very simple & easy things but i am new to
> networking, & want to learn so kindly help
>
> Thanx & Regards
> Prashant Desai
>
>
>
>
> Go To http://www.iqara.net
>
> _______________________________________________
> cisco-nsp mailing list  real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/